Cellular Precipitation in Fe-20 wt%Cr-25 wt%Ni-Be Austenitic Steels
نویسندگان
چکیده
منابع مشابه
Modelling simultaneous precipitation reactions in austenitic stainless steels
A physical model has been developed for simultaneous precipitation reactions in austenitic stainless steels, taking into account interactions between phases. Comparisons against experimental results show satisfying agreement, with the model successfully predicting the existence of transient phases that are often observed, but not predicted in equilibrium calculations. An analysis of σ -phase ki...
متن کاملA Critical Assessment of First Principles Inputs for Modeling RIS in Austenitic Fe-Cr-Ni Steels
Radiation induced segregation (RIS) in austenitic Fe-Cr-Ni steels is a widely studied but incompletely understood process important for reactor components. Experimental studies have shown that Cr depletes strongly at grain boundaries, giving rise to corrosion resistance issues. Various research throughout the years has produced models that make specific assumptions about the dominant mechanisms...
متن کاملLow-Temperature Carburization of Austenitic Stainless Steels
LOW-TEMPERATURE CARBURIZATION is a gaseous carburization process performed at atmospheric pressure, at temperatures where the kinetics of substitutional diffusion are very slow. Low-temperature carburization hardens the surface of austenitic stainless steels through the diffusion of interstitial carbon, without the formation of carbides. The surface must be activated, by modification and remova...
متن کاملDevelopment of Alumina-Forming Austenitic Stainless Steels
This paper presents the results of the continued development of creep-resistant, alumina-forming austenitic (AFA) stainless steel alloys, which exhibit a unique combination of excellent oxidation resistance via protective alumina (Al2O3) scale formation and high-temperature creep strength through the formation of stable nano-scale MC carbides and intermetallic precipitates. Efforts in fiscal ye...
متن کاملY Studies on Austenitic Stainless Steels
Abstract--In this investigation, the fracture surfaces of SS 304 and SS 316 austenitic steels were analysed using the X-ray fractography technique. In both cases, a decrease in the austenite content was observed at the fracture surface as a result of deformation induced martensite, indicating a linear relation with Km~ within the stable crack growth region. The presence of this martensite was f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1977
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.41.8_791