Cefquinome Controlled Size Submicron Particles Precipitation by SEDS Process Using Annular Gap Nozzle
نویسندگان
چکیده
منابع مشابه
Measurements of Submicron Fog Particles Generated in a Nozzle
-Measurements were made of the size and relative number of particles condensed in a "large" supersonic nozzle. Stagnation temperature was held at 528°R and stagnation pressure was varied from ~ 1/3 to ~ 2/3 atm with the water as the condensing vapor. The mass fraction of water vapor was varied from ~8 x 10 -3 to ~30 × 10 -3. The size of particles was determined by measurement of light scattered...
متن کاملSeparation of Submicron Particles by Hetero - Coagulation
It is necessary to utilize special techniques of separating submicron-size particles from other micron-size particles such as hydrocyclone and liquid-liquid separating. In this experimental work, separation of TiO2 and Al(OH)3 artificial mixture was investigated. Separation of submicron TiO2 particles from micron Al(OH)3 particles was carried out using a column bed filled with plastic fiber tub...
متن کاملSYNTHESIS OF ULTRA-FINE PARTICLES OF BAFE12O19 BY CO- PRECIPITATION ROUTE USING CHLORIDE/NITRATE PRECURSORS
Ultra-fine particles of barium hexaferrite have been synthesized by co-precipitation method using barium nitride and iron chloride precursors with a Fe/Ba molar ratio of 11. Co-precipitation was carried out at 25 and 80°C using NaOH as a precipitant. Effect of coprecipitation and annealing temperatures on the phase composition and morphology of the products have been investigated using XRD and ...
متن کاملRemoval of submicron particles from solid surfaces using surfactants
Article history: Received 26 August 2015 Received in revised form 6 October 2015 Accepted 13 October 2015 Available online 6 December 2015 The removal of nanoor submicron particles from solid substrates is of considerable interest in a range of existing industries including cleaning of surfaces inside a spacecraft after evaporation of nanofluids. Amethod of nanoparticle removal using aqueous su...
متن کاملAnalysis of a Low-Angle Annular Expander Nozzle
An experimental and numerical analysis of a low-angle annular expander nozzle is presented to observe the variance in shock structure within the flow field. A RANS-based axisymmetric numerical model was used to evaluate flow characteristics and the model validated using experimental pressure readings and schlieren images. Results were compared with an equivalent convergingdiverging nozzle to de...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Chemical Engineering
سال: 2017
ISSN: 1687-806X,1687-8078
DOI: 10.1155/2017/5329257