Cavitation erosion mechanisms in Co-based coatings exposed to seawater
نویسندگان
چکیده
منابع مشابه
A New Parameter to Predict Cavitation Erosion
In order to avoid or predict cavitation erosion, it is necessary to know resistance of materials against to cavitation impacts. The cavitation impacts, which are larger than certain threshold level, only affect cavitation erosion of materials. In the present paper, existence of the threshold level was revealed experimentally. The threshold level of material is a new parameter to predict the cav...
متن کاملMechanisms governing the high temperature erosion of thermal barrier coatings
The impact of thermal barrier coatings by hard projectiles at high temperature has been analyzed. Three different domains have been explored: each differentiated by particle size, velocity, temperature and TBC composition. Domain I applies when the projectile creates deeply penetrating plastic/densification zones. In this case, short time elastic effects are relatively unimportant. The response...
متن کاملEffect of Porosity on Cavitation Erosion Resistance of HVOF Processed Tungsten Carbide Coatings
The phenomenon of cavitation is widely experienced in both pumps and under-water components of hydro power plants. The mechanism of material damage during cavitation is mainly attributed to implosion of high velocity bubbles on to the surface giving raise to local increase in stresses in excess of 1.4 GPa. In addition, material wastage due to particle induced erosion is observed in hydro plants...
متن کاملRelationships between spray parameters, microstructures and ultrasonic cavitation erosion behavior of HVOF sprayed Fe-based amorphous/nanocrystalline coatings.
Fe-based amorphous/nanocrystalline coatings were prepared on the AISI 321 steel substrate by the high-velocity oxygen-fuel (HVOF) thermal spraying technology. The effect of selected parameters (oxygen flow, kerosene flow and spray distance) on the cavitation erosion resistance (denoted as Rc) of the coating were investigated by using the Taguchi method. Statistical tools such as design of exper...
متن کاملThe Volume Factor in Cavitation Erosion
Use of jet cavitation, however, occurs through an exit nozzle whose diameter can be changed, thereby changing volume with changing velocity. The results of such a change is shown to tie cavitation damage more powerfully to volume flow than to velocity. A specific example is in cavitation erosion of a high strength igneous rock which remained virtually undamaged at 70 MPa driving pressure but wa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ultrasonics Sonochemistry
سال: 2020
ISSN: 1350-4177
DOI: 10.1016/j.ultsonch.2019.104799