Cavitation Erosion Characteristics of Powder Metallurgy Aluminum Alloys.
نویسندگان
چکیده
منابع مشابه
Accelerated Threshold Fatigue Crack Growth Effect – Powder Metallurgy Aluminum Alloy
Fatigue crack growth (FCG) research conducted in the near threshold regime has identified a room temperature creep crack growth damage mechanism for a fine grain powder metallurgy (PM) aluminum alloy (8009). At very low ∆K, an abrupt acceleration in room temperature FCG rate occurs at high stress ratio (R = Kmin/Kmax). The near threshold accelerated FCG rates are exacerbated by increased levels...
متن کاملThe Effect of Milling Time on the Microstructural Characteristics and Strengthening Mechanisms of NiMo-SiC Alloys Prepared via Powder Metallurgy
A new generation of alloys, which rely on a combination of various strengthening mechanisms, has been developed for application in molten salt nuclear reactors. In the current study, a battery of dispersion and precipitation-strengthened (DPS) NiMo-based alloys containing varying amounts of SiC (0.5-2.5 wt %) were prepared from Ni-Mo-SiC powder mixture via a mechanical alloying (MA) route follo...
متن کاملEffects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts
The effects of friction stir processing (FSP) on the microstructure and mechanical properties of aluminum powder metallurgy (PM) parts was investigated. PM parts were then subjected to FSP at advancing speeds (v) of 40-200 mm/min and tool rotational speeds (ω) of 800-1600 rpm. Microhardness (HV) and tensile tests at room temperature were used to evaluate the mechanical properties of the frictio...
متن کاملCavitation erosion of laser processed Fe-Cr-Mn and Fe-Cr-Co alloys
Purpose: Purpose of this paper is attempt explanation how laser beam processing influence on the cavitation performance of the Fe-Cr-Mn and Fe-Cr-Co alloys. This kind of alloys are frequently used in Polish power plants to routine repairs of damaged blades working under cavitation loading. Design/methodology/approach: Padding welds of investigated alloys were tested for three cases: after laser...
متن کاملCavitation erosion behaviour of laser processed Fe-Cr-Mn and Fe-Cr-Co alloys
Purpose: Purpose of this paper is investigation of influence of the surface processing by laser method on the cavitation performance of the Fe-Cr-Mn and Fe-Cr-Co alloys. This kind of alloys are frequently used in Polish power plants to routine repairs of damaged blades working under cavitation loading. Design/methodology/approach: Padding welds were tested for three cases: without additional pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1994
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.41.922