Cation adsorption characteristics of silica-alumina adsorbant

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Comparison of adsorption affinity of polyacrylic acid for surfaces of mixed silica–alumina

The influence of solution pH (in the range 3-9) on the adsorption of polyacrylic acid (PAA) on the mixed silica-alumina surface (SA-3: SiO2 97 %-Al2O3 3 % and SA-96: SiO2 4 %-Al2O3 96 %) was investigated. The following methods were applied in experiments: spectrophotometry, viscosimetry, potentiometric titration, and microelectrophoresis, which enable determination of adsorbed amount of the pol...

متن کامل

Adsorption Capacity for Phosphorus Comparison among Activated Alumina, Silica Sand and Anthracite Coal

Experimental researches on adsorptive capacity of activated alumina, silica sand and anthracite coal for phosphorus were conducted. Results showed that performances of three filter media were all in line with Langmuir isotherm, and activated alumina adsorptive performance was much better than silica sand and anthracite coal for phosphorus removal. The adsorptive capacity of activated alumina, s...

متن کامل

Adsorption Studies of Cyanide ( CN ) - on Alumina

Sumra Naeem and Uzma Zafar Minerals Processing Research Centre (MPRC) PCSIR Laboratories Complex, Lahore-54600, Ferozepur Road, Lahore, Pakistan -------------------------------------------------------------------------------------------------------------------------------------------Abstract In this investigation, adsorption of cyanide on to alumina has been studied by means of batchtechnique. ...

متن کامل

Adsorption of sodium hexanoate on α-alumina.

Neutron reflection and adsorption isotherm measurements have been used to study the adsorption behaviour of hexanoic acid onto α-alumina surfaces. Importantly, the pH dependence of the behaviour has been characterised with a pronounced maximum in adsorption identified at a pH of approximately 5, close to the pKa of the acid. The adsorbed layer is identified as a bilayer, which is reasonable giv...

متن کامل

Adsorption of Hydrogen Fluoride on Alumina

In the smelting of aluminium, HF fumes are produced that are subsequently trapped by absorption onto alumina. The factors that affect the adsorption capacity of alumina have been studied previously and are weU established, but the mechanism by which HF adsorbs onto the alumina surface is not well understood. In this study, x-ray photoelectron spectroscopy (XPS) was used to investigate the natur...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: BUNSEKI KAGAKU

سال: 1971

ISSN: 0525-1931

DOI: 10.2116/bunsekikagaku.20.1459