Cathodic Limiting Current Density in Copper Electrolysis
نویسندگان
چکیده
منابع مشابه
On Current Density and Excess Power Density in Electrolysis Experiments
Results of a study of an electrolytic device that can produce excess power are presented. The power calibration procedure used for the experiments and the data analysis procedure is briefly described in this paper. Different combinations of cathode and electrolyte were investigated. Thin foils of different pure metals were and thin spattered layers of different pure metals on different substrat...
متن کاملThe Cathodic Reduction Processes of SiO2 Impurity in Magnesium Electrolysis
The cathodic reduction of SiO2 in KCl-CaCl2-NaCl-MgCl2 melt was studied using tungsten wires as working electrodes. The results of cyclic voltammetry square wave voltammetry and chronopotentiometry showed that the cathodic deposition of silicon is a quasi-reversible diffusion-controlled reaction, followed by a four electrons transfer step. The results of current reversal chronopotentiometry and...
متن کاملCathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology
Abstract YAG (Yttrium Aluminum Garnet) was successfully prepared through cathodic electrodeposition process using applying different current densities to the mixture of YCl3 and AlCl3 dissolved in water/ethanol 1:1 solution. Hydroxide precursors were cathodically grown on the cathode surface (at different current densities) and then the obtained hydroxide powder was heat-treated at 1100 °...
متن کاملLimiting current density in a crossed-field nanogap.
Using a mean-field theory, we have studied the quantum extension on the limiting current density in a crossed-field nanogap. When the gap spacing is less than the electron wavelength, our results show that the limiting current density is increased by a large factor from the classical values due to the effects of electron tunneling. The effects of the external magnetic field diminish with a decr...
متن کاملAnode Slime Gained During Electrolysis Process of Secondary Copper Anodes
The aim of this research is to get a better understanding of the electrolytic refining process in order to yield the anode slime. Three types of secondary copper anodes are electro refined in an electrolytic system, where the electrolyte is an acid of copper sulphate solution. As a result of the electro-refining process the anode slime has been gained as secondary product. The experimental ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Denki Kagaku oyobi Kogyo Butsuri Kagaku
سال: 1970
ISSN: 0366-9297,2434-2556
DOI: 10.5796/kogyobutsurikagaku.38.343