Cathode Exhaust Gas Recirculation for Polymer Electrolyte Fuel Cell Stack
نویسندگان
چکیده
منابع مشابه
Evaluating Cathode Catalysts in the Polymer Electrolyte Fuel Cell
The polymer electrolyte membrane fuel cell (PEMFC) converts the chemical energy of hydrogen and oxygen (air) into usable electrical energy. At the cathode (the positive electrode), a considerable amount of platinum is generally required to catalyse the sluggish oxygen reduction reaction (ORR). This has implications regarding the cost in high-power applications, and for making a broad commercial...
متن کاملNonlinear Model Predictive Control of a PEM Fuel Cell System for Cathode Exhaust Gas Generation
Polymer electrolyte membrane (PEM) fuel cells are highly efficient energy converters and provide electrical energy, cathode exhaust gas with low oxygen concentration and water. They are investigated as replacement for auxiliary power units (APU) that are currently used for electrical power generation on aircraft. For generation of oxygen depleted cathode exhaust air (ODA) oxygen concentration m...
متن کاملPolyaniline-derived Non-Precious Catalyst for the Polymer Electrolyte Fuel Cell Cathode
This paper focuses on a new polyaniline-derived non-precious cathode catalyst with high oxygen-reduction activity, verified in electrochemical and fuel cell testing. The rotating disk (RDE) onset and half-wave potential (E1⁄2) of oxygen reduction were measured at 0.90 V and 0.77 V, respectively. Rotating ring-disk electrode (RRDE) study revealed very good selectivity in the fourelectron reducti...
متن کاملMultiscale modeling of single-phase multicomponent transport in the cathode gas diffusion layer of a polymer electrolyte fuel cell
This research reports a feasibility study into multi-scale polymer electrolyte fuel cell (PEFC) modelling through the simulation of macroscopic flow in the multi-layered cell via 1D electrochemical modelling, and the simulation of microscopic flow in the cathode gas diffusion layer (GDL) via 3D single-phase multi-component lattice Boltzmann (SPMC-LB) modelling. The heterogeneous porous geometry...
متن کاملExhaust Gas Recirculation in On·board Diagnostic System
Introduce electronic control exhaust gas recirculation EGR system in the passenger cars and light duty vehicles was made because of fuel direct injectionengines. In this engines temperature combustion process is a higher then other type engine and in this connections NO, emissions were higher to. Simultaneously was appearing problems to electronic exhaust gas recirculation control in connection...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel Cells
سال: 2018
ISSN: 1615-6846
DOI: 10.1002/fuce.201700219