Catalytic performance of Ni-Cu/Al2O3 for effective syngas production by methanol steam reforming
نویسندگان
چکیده
منابع مشابه
Fe−Ni−MCM-41 Catalysts for Hydrogen-Rich Syngas Production from Waste Plastics by Pyrolysis−Catalytic Steam Reforming
A two-stage pyrolysis−catalytic steam reforming process was used with mesoporous MCM-41 supported iron and nickel bimetallic catalysts for hydrogen-rich syngas production from a simulated mixture of waste plastics. Different Fe/Ni weight ratios (00:20, 05:15, 10:10, 05:15, and 20:00) have been investigated to determine the influence on hydrogen production. The results showed that the presence o...
متن کاملPd/Ga2O3 methanol steam reforming catalysts: Part II: Catalytic selectivity
Structure, morphology and composition of two Pd/Ga2O3 methanol steam reforming catalysts were correlated with the associated activity and selectivity changes in the methanol steam reforming reaction and linked to studies on pure Ga2O3 supports. For both systems, that are, a Pd/Ga2O3 thin film model catalyst and a powder-supported Pd catalyst, we identified a temperature range in which the reduc...
متن کاملSteam Reforming and Gasification of Pyrolysis Oil Reactor and Process Development for Syngas Production from Biomass
Gasification of pyrolysis oil was studied in a fluidized bed over a wide temperature range (523-914 °C) with and without the use of nickel-based catalysts. Noncatalytically, a typical fuel gas was produced. Both a special designed fluid bed catalyst and a crushed commercial fixed bed catalyst showed an initial activity for syngas (H2 and CO) production at T >700 °C. However, these catalysts los...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel
سال: 2018
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2018.06.025