منابع مشابه
Selective catalytic reduction of sulfur dioxide by carbon monoxide over iron oxide supported on activated carbon
The selective reduction of sulfur dioxide with carbon monoxide to elemental sulfur was studied over ACsupported transition-metal oxide catalysts. According to the study, Fe2O3 /AC was the most active catalyst among the 4 AC-supported catalysts tested. By using Fe2O3 /AC, the best catalyst, when the feed conditions were properly optimized (CO/SO2 molar ratio = 2:1; sulfidation temperature, 400 ◦...
متن کاملCatalytic graphitization of three-dimensional wood-derived porous scaffolds
A catalytic technique to enhance graphite formation in nongraphitizing carbons was adapted to work with three-dimensional wood-derived scaffolds. Unlike many synthetic graphite precursors, wood and other cellulosic carbons remain largely disordered after high temperature pyrolysis. Using a nickel nitrate liquid catalyst and controlled pyrolysis conditions, wood-derived scaffolds were produced s...
متن کاملCatalytic Oxidation by Means of Complex Iron
The observation of Manchot? that sodium pentacyano-ammineferroate2 I absorbs oxygen has led Baudisch and his coworkers3 to study the catalytic action of this salt, as well as of its water analogue II, in the oxidation of pyrimidines and purines. The present authors have previously reported in this journal4 on the nature of the oxidation products obtained. In the present paper the problem is con...
متن کاملImproved graphitization and electrical conductivity of suspended carbon nanofibers derived from carbon nanotube/polyacrylonitrile composites by directed electrospinning
Single suspended carbon nanofibers on carbon micro-structures were fabricated by directed electrospinning and subsequent pyrolysis at 900 C of carbon nanotube/polyacrylonitrile (CNT/PAN) composite material. The electrical conductivity of the nanofibers was measured at different weight fractions of CNTs. It was found that the conductivity increased almost two orders of magnitude upon adding 0.5 ...
متن کاملStructural evolution in the graphitization process of activated carbon by high-pressure sintering
Activated carbon was treated at 5 GPa up to 1600 C, and the structural evolution in the graphitization process was investigated. The graphitization temperature is equal to 1200 C at 5 GPa, reflected by X-ray diffraction (XRD) patterns. Honeycomb-like structures in micron scale come into being in the high-pressure sintering temperature range of 100
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TANSO
سال: 1972
ISSN: 1884-5495,0371-5345
DOI: 10.7209/tanso.1972.10