Catalytic characteristics of a Ni–MgO/HZSM-5 catalyst for steam reforming of toluene
نویسندگان
چکیده
منابع مشابه
Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane
Performance of Ni/Al2O3 catalysts (10 wt.% Ni) in steam reforming of n-butane was investigated in terms of n-butane conversion, selectivity to hydrogen and hydrogen yield. The process was carried out in a fixed-bed tubular reactor at 650 °C and atmospheric pressure. The volumetric flow rates of n-butane and steam were 0.1 mL/min and 0.6 mL/min, respectively. The catalysts were prepared by preci...
متن کاملEffects of Catalyst Tubes Characteristics on a Steam Reforming Process in Ammonia
The tubes in an Ammonia primary reformer furnace operate close to the limits of materials technology in terms of the stress induced as a result of very high temperatures, combined with large differential pressures across the tube wall. Operation at tube wall temperatures significantly above design can result in a rapid increase in the number of tube failures, since tube life is very sensitive t...
متن کاملZnO Nanowire-supported Ag Catalyst for Methanol Steam Reforming
Alternative energy sources, such as various fuel cell technologies, have attracted intense attention due to their high efficiency and low emissions of pollutants. Methanol, with its high hydrogen/carbon ratio, low sulfur content and the absence of carbon–carbon bonds, has been identified as a highly suitable source for onboard production of hydrogen [1]. Among several reactions for converting m...
متن کاملMethanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst
Ternary Cu/ZnO/metal oxide catalysts are prepared through the co-precipitation method under strict control of parameters like pH, calcination conditions, and precipitation temperature in a systematic manner. The metal oxides applied in this study consist of Al2O3, ZrO2, La2O3 and Ce2O3. The distinction of this work in comparison with similar research is a comprehensive investigatation of the ca...
متن کاملSteam Reforming of Bio-Compounds with Auto-Reduced Nickel Catalyst
As an extension of chemical looping combustion, chemical looping steam reforming (CLSR) has been developed for H2 production. During CLSR, a steam reforming (SR) process occurs following the reduction of catalysts by the reforming feedstock itself (termed “auto-reduction”), as opposed to a separate, dedicated reducing agent like H2. This paper studied SR performances of four common bio-compound...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2020
ISSN: 2046-2069
DOI: 10.1039/d0ra02403a