Catalytic bitumen cracking in sub- and supercritical water
نویسندگان
چکیده
منابع مشابه
Catalytic gasification of glycerol in supercritical water
The conversion of glycerol in supercritical water (SCW) was studied at 510 – 550°C and a pressure of 350 bars using both a bed of inert and non-porous ZrO2 particles (hydrothermal experiments), and a bed of 1 % Ru/ZrO2 catalyst particles. Experiments were conducted with a glycerol concentration of 5 wt% in a continuous isothermal fixed-bed reactor at a residence time between 2 and 10 s. Hydroth...
متن کاملDepolymerization of polyesters in sub- and supercritical water
Depolymerization behavior polyesters (poly(ethylene terephthalate) (PET) and poly(ethylene 2,6-naphthalene dicarboxylate) (PEN)) in suband supercritical water was investigated for the purpose of monomer recycling. In case of the depolymerization of PET, the yield of terephthalic acid (TPA) increased to 90 % with increasing reaction temperature up to 693 K while the maximum yield of ethylene gly...
متن کاملHydrolysis of Vegetable Oils in Sub- and Supercritical Water
Water, in its subcritical state, can be used as both a solvent and reactant for the hydrolysis of triglycerides. In this study, soybean, linseed, and coconut oils were successfully and reproducibly hydrolyzed to free fatty acids with water at a density of 0.7 g/mL and temperatures of 260-280 " C. Under these conditions the reaction proceeds quickly, with conversion of greater than 97% after 15-...
متن کاملHydrogen rich gas production via nano-catalytic gasification of bagasse in supercritical water
Ru/Al2O3 nano-catalysts were prepared with impregnation and microemulsion techniques. The supercritical water gasification reaction was performed at 400oC and 5-60 min. Within the tested operation conditions, the reaction residence time of 15 min was the optimum to maximize the H2 yield. It was observed that using microemulsion technique increases the total gas yield significantly. Using microe...
متن کاملSupercritical Water Radiolysis Chemistry Supercritical Water Corrosion
The direct measurement of the chemistry in reactor cores is extremely difficult. The extreme conditions of high temperature, pressure, and radiation fields, are not compatible with normal chemical instrumentation. There are also problems of access to fuel channels in the reactor core. For these reasons, all reaction vendors and many operators have extensively used theoretical calculations and c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel Processing Technology
سال: 2016
ISSN: 0378-3820
DOI: 10.1016/j.fuproc.2015.10.032