Casting and Welding of Aluminium Matrix Composite Materials Reinforced by SiC Particles
نویسندگان
چکیده
منابع مشابه
Study on damping capacity and dynamic Young’s modulus of aluminium matrix composite reinforced with SiC particles
The development of high damping materials for noise reduction and attenuation of vibration on structural applications, such as automotive and aerospace industries, has been investigated. This experimental study is concerned with the damping capacity (tan delta) and dynamic Young’s modulus (|E*|) of Silicon carbide (SiC) reinforced aluminium (Al) matrix composite. AlSi-SiCp composite was produce...
متن کاملUltrasonic assisted turning of an aluminium-based metal matrix composite reinforced with SiC particles
In this study, diamond turning of an aluminiumbased metal matrix composite (MMC) reinforced with SiC particles was conducted with the assistance of ultrasonic vibrations. A simple and small size vibration device was designed to mount a piezoelectric transducer and a diamond insert onto a CNC machine. Turning experiments were carried out using a factorial design to investigate the effects of vib...
متن کاملCasting of SiC Reinforced Metal Matrix Composites
Composites based on two aluminium alloys (A536 and 6061) reinforced with 10% or 20% volume fraction of SiC particles were produced by gravity casting and a novel two-step mixing method was applied successfully to improve the wettability and distribution of the particles. The SiC particles were observed to be located predominantly in the interdendrit ic regions, and a thermal lag model is propos...
متن کاملGrinding of Aluminium-Based Metal Matrix Composites Reinforced with Al2O3 or SiC Particles
This paper presents results obtained from the grinding of aluminium-based metal matrix composites reinforced with either aluminium oxide (Al2O3) or silicon carbide (SiC) particles using grinding wheels made of SiC in a vitrified matrix or diamond in a resin-bonded matrix. The study used grinding speeds of 1100–2200 m min , a grinding depth of 15 m for rough grinding and 0.1–1 m for fine grindin...
متن کاملModelling and Numerical Computation of Thermal Expansion of Aluminium Matrix Composite with Densely Packed SiC Particles
The coefficient of thermal expansion (CTE) is one of the most important physical properties of metal matrix composites (MMCs). The thermal expansion response is correlated to the microstructure, the deformation of the matrix, and the internal stress conditions. In the present study the physical CTE of aluminium matrix composite (AMC) reinforced with 70 vol. % SiC particles is analytically compu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2018
ISSN: 1757-899X
DOI: 10.1088/1757-899x/434/1/012222