Cast Al-V-Fe Alloys with Nanoscale Particles
نویسندگان
چکیده
منابع مشابه
THERMAL FATIGUE RESISTANCES OF 356 AND 413 CAST Al ALLOYS
Abstract: Thermal fatigue is a stochastic process often showing considerable scatter even in controlled environments. Due to complexity of thermal fatigue, there is no a complete analytical solution for predicting the effect of this property on the life of various components, subjected to severe thermal fluctuations. Among these components, one can mention car cylinder, cylinder head and pi...
متن کاملCreep Behavior of Al-Si Die-Cast Alloys
Commercial, aluminum die-cast alloys are subject to long-term stresses leading to viscoelastic material responses resulting in inefficient engine operation and failure. Constant load creep tests were conducted on aluminum die-casting alloys: B-390, eutectic Al-Si and a 17% Si-Al alloys. Rupture occurred in the primary creep regime, with the eutectic alloy having the longest times to failure. Pr...
متن کاملExtreme Ductility at the Nanoscale in Fe-based Alloys
A novel method for preparing and testing bending specimens in-situ the TEM has been developed. This method provides high visibility of the crack front and its associated plastic zone. This is significant because energy release rates can now be calculated at many points throughout the test based on crack tip opening displacement (CTOD), crack opening angle (COA), and crack advance. Further refin...
متن کاملCALCULATION OF THERMODYNAMIC PROPERTIES OF Al-Fe, Al-Ni AND Ni-Fe ALLOYS USING FACTSAGE
Thermodynamic predicting analysis of three binary systems Al-Fe, Al-Ni and Ni-Fe are shown in this paper. Thermodynamic analysis involved calculation of activities, coefficient of activities, partial and integral values for enthalpies and Gibbs energies of mixing and excess energies at three different temperatures: 1873K, 1900K and 1973K, as well as calculated phase diagrams, for the investigat...
متن کاملNanoscale Phase Evolution during Continuum Decomposition of Fe-Cr Alloys
The continuum decomposition of the Fe-Cr alloys from initial phase separation to steady-state coarsening with concentrations varying from 25 at % Cr and 30 at % Cr to 33 at % Cr aged at 750 K was studied by utilizing three-dimensional phase-field simulations. The dynamic stages of separation of nanoscale Cr-enriched α' phase were distinguished by the evolution of the volume fraction, particle n...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2001
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.42.682