Case shell joint at short-term creep
نویسندگان
چکیده
منابع مشابه
Effects of Ageing and Forging on Short-term Creep Behaviors of Inconel-713C Superalloy at 850 °C
In this paper, the short-term creep behavior of the Inconel-713C superalloy after different pre-treatments including the ageing and forging processes has been studied at 850 °C. The ageing heat treatment was heating at 930 °C for 16 hours without solutioning process. The optical microscopy (OM) and the scanning electron microscopy (SEM) techniques were applied for microstructural evaluations. T...
متن کاملA Study on Predicting the Long-term Creep Behavior of Plastics using the Short-term Creep Test
Abstract: The creep performance of plastics is one of the main criteria for a variety of applications with strict dimensional stability needs, including electrical/electronic parts and various automotive applications. However obtaining or generating accurate creep data is very difficult for both resin suppliers and product designers because the creep property is time dependent, which means it t...
متن کاملEstimating the creep strain to failure of PP at different load levels based on short term tests and Weibull characterization
The short and long term creep behavior is one of the most important properties of polymers used for engineering applications. In order to study this kind of behavior of PP tensile and short term creep measurements were performed and analyzed using long term creep behavior estimating method based on short term tensile and creep tests performed at room temperature, viscoelastic behavior, and vari...
متن کاملShort-Term Creep Behavior of CFRP-Reinforced Wood Composites Subjected to Cyclic Loading at Different Climate Conditions
Carbon fiber reinforced plastic (CFRP) was used to adhesively reinforce Chinese fir (Cunninghamia lanceolata) wood specimens. This study examined the flexural static and creep performances of CFPR-reinforced wood composites that had been subjected to changes in moisture and stress levels. The major findings were as follows: 1) the cyclic creep was slightly lower for those specimens subjected to...
متن کاملInfluence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Short-term Biomass Enrichment
In this study, the potential of four different culture selection methods under short-term enrichment time (STE) to accumulate PHA-producing bacteria in mixed activated sludge was compared and the most efficient culture selection method was introduced. This means, PHA-producing microbial community was firstly enriched in a sequencing batch bioreactor (SBR) with four different selection methods i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science intensive technologies in mechanical engineering
سال: 2019
ISSN: 2223-4608
DOI: 10.30987/article_5c7434f72d98d2.34602439