Carboxymethyl chitosan/sodium alginate-based micron-fibers fabricated by emulsion electrospinning for periosteal tissue engineering
نویسندگان
چکیده
منابع مشابه
Poly(ε-caprolactone) Scaffolds Fabricated by Melt Electrospinning for Bone Tissue Engineering
Melt electrospinning is a promising approach to manufacture biocompatible scaffolds for tissue engineering. In this study, melt electrospinning of poly(ε-caprolactone) onto structured, metallic collectors resulted in scaffolds with an average pore size of 250-300 μm and an average fibre diameter of 15 μm. Scaffolds were seeded with ovine osteoblasts in vitro. Cell proliferation and deposition o...
متن کاملPoly(lactide-co-glycolide)/hydroxyapatite nanofibrous scaffolds fabricated by electrospinning for bone tissue engineering.
Poly(lactide-co-glycolide) (PLGA) nanofibrous composite scaffolds having nano-hydroxyapatite particles (HAp) in the fibers were prepared by electrospinning of PLGA and HAp with an average diameter of 266.6 ± 7.3 nm. Microscopy and spectroscopy characterizations confirmed integration of the crystalline HAp in the scaffolds. Agglomerates gradually appeared and increased on the fiber surface along...
متن کاملElectrospinning Natural Polymers for Tissue Engineering Applications
Electrospinning is an efficient method by which to produce scaffolds composed of nanoscale to microscale fibers, which are comparable to the fiber diameters of native components of the extracellular matrix. In electrospinning, a polymer solution is pumped through a syringe that is connected to a high voltage source. As a droplet forms at the tip of the needle, electrostatic repulsions form long...
متن کاملElectrospinning Auricular Shaped Scaffolds for Tissue Engineering.
Poly(ɛ)caprolactone scaffolds have been electrospun directly into an auricular shaped conductive mould. Bovine chondrocytes were harvested from articular cartilage and seeded onto 16 of the produced scaffolds, which received either an ethanol (group A) or a plasma treatment (group B) for sterilisation before seeding. The seeded scaffolds were cultured for 3 weeks in vitro and analysed with rega...
متن کاملShort Communication Emulsion electrospinning: Composite fibers from drop breakup during electrospinning
*Correspo Engineer USA. E-mail: v We evaluate the feasibility of electrospinning oil-in-water type emulsions. The emulsions had an aqueous solution of polyethylene oxide (PEO) as the continuous phase, and either mineral oil or a polystyrene (PS) in toluene solution as the drop phase. The Taylor cones and electrified liquid jets were stable even when the emulsion drops were as large as a few-ten...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2020
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.108849