Carboxylated nitrile butadiene rubber/hybrid filler composites
نویسندگان
چکیده
منابع مشابه
Transport properties of carboxylated nitrile butadiene rubber (XNBR)-nanoclay composites; a promising material for protective gloves in occupational exposures
This study was conducted in response to one of the research needs of National Institute for Occupational Safety and Health (NIOSH), i.e. the application of nanomaterials and nanotechnology in the field of occupational safety and health. In order to fill this important knowledge gap, the equilibrium solubility and diffusion of carbon tetrachloride and ethyl acetate through carboxylated nitrile b...
متن کاملGloves against mineral oils and mechanical hazards: composites of carboxylated acrylonitrile–butadiene rubber latex
Resistance to permeation of noxious chemical substances should be accompanied by resistance to mechanical factors because the glove material may be torn, cut or punctured in the workplace. This study reports on glove materials, protecting against mineral oils and mechanical hazards, made of carboxylated acrylonitrile-butadiene rubber (XNBR) latex. The obtained materials were characterized by a ...
متن کاملImproved curing conditions and mechanical/chemical properties of Nitrile Butadiene Rubber Composites Reinforced with Carbon Based Nanofillers
Multiwall carbon nanotubes (MWCNTs) and carbon nanofibers (CNFs) with contents ranging from 1 to 10 phr (part per hundred parts of rubber) were selected and then characterized to reinforce acrylonitrile butadiene rubber (NBR) based composites. Fabrication of nanocomposites were done by a novel procedure and structural analysis along with variety of mechanical and chemical tests, according to th...
متن کاملCompatibilization Efficiency of Carboxylated Nitrile Rubber and Epoxy Pre - polymer in Nitrile / Acrylic Rubber
An investigation has been made of the effects from a compatibilizer, viz. carboxylated nitrile rubber (XNBR), on several properties of nitrile rubber (NBR) and acrylic rubber (ACM) blends, including curing characteristics, mechanical, dynamic mechanical and dielectric properties. The presence of XNBR until 10 phr resulted in an improvement of the ultimate tensile properties, especially elongati...
متن کاملIonically Bonded Filler-Elastomer Composites*
Tertiary amine-modified corn starches were converted to their basic or hydroxide form and combined with carboxylated butadiene-acrylonitrile copolymer and butadiene-styrene-sulfonic acid polymer to produce ionically bonded filler-elastomer composites. An increasing percentage of the elastomer fraction in the starch-elastomer composite is insolubilized as the starch-to-elastomer ratio increases....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2012
ISSN: 1980-5373,1516-1439
DOI: 10.1590/s1516-14392012005000086