Carbothermal Synthesis of Aluminum Nitride Using Sucrose
نویسندگان
چکیده
منابع مشابه
Synthesis of Boron-Aluminum Nitride Thin Film by Chemical Vapour Deposition Using Gas Bubbler
Boron included aluminium nitride (B-AlN) thin films were synthesized on silicon (Si) substrates through chemical vapour deposition ( CVD ) at 773 K (500 °C). tert-buthylamine (tBuNH2) solution was used as nitrogen source and delivered through gas bubbler. B-AlN thin films were prepared on Si-100 substrates by varying gas mixture ratio of three precursors. The structural properties of the films ...
متن کاملsynthesis of amido alkylnaphthols using nano-magnetic particles and surfactants
we used dbsa and nano-magnetic for the synthesis of amido alkylnaphtols.
15 صفحه اولTow-Step Synthesis of Aluminum Oxynitride (AlON) via Carbothermal and Nitridation Route
The aim of this research was to study synthesize gamma aluminum oxynitride powder with cubic spinel structure. In order to carry out this process, carbothermal reduction and nitridation of α-alumina as starting powder was used. This process was carried out in two steps, that in the first step at 1550˚C, a portion of α-alumina was reacted with carbon and aluminum nitride (AlN) was formed, then i...
متن کاملSynthesis of Boron Nitride powder by carbothermal method, using phenolic resin and carbon black and investigating the effect of additive of calcium carbonate
Effect of CaCO3 on carbothermic formation of hexagonal boron nitride (h-BN) was investigated. B2O3–C mixtures containing CaCO3 additive were reacted at 1500 for 120 min in nitrogen atmosphere. Formed phases in the reaction products were determined by powder-XRD analyses, and amounts of the constituents were determined by chemical analyses. Particle size and morphology of the formed h-BN powde...
متن کاملSynthesis of HfB2 Powders by Carbothermal Reduction
In this research, solid state carbothermal synthesis of HfB2 Nano powders was investigated. For this purpose, HfO2,H3BO3, carbon active or phenolic resin were used as raw materials for carbothermal reaction. After 2-4 hours of milling the raw materials by a planetary ball in an ethanol media, the mixture was heat dried and pressed in to disks under pressure of 20-30 bar. The disks were then pla...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the American Ceramic Society
سال: 1994
ISSN: 0002-7820,1551-2916
DOI: 10.1111/j.1151-2916.1994.tb07113.x