Carbon's High-Temperature Behavior

High Temperature Behavior of Dual Phase Steels

Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...

high temperature behavior of dual phase steels

dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500c. stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500c, and smooth flow at the other temperatures. both yield and ultimate tensile strengths increased with increasing testing temperature up to about 4500c and then decreased at h...

Tungsten Behavior at High Temperature and High Stress

Recently reported results on the behaviour of the tungsten under conditions expected in the Neutrino Factory target have strengthened the case for a solid target option for the Neutrino Factory. This paper gives a description of the measurements of the surface motion of tungsten wires, stressed by a pulsed current, using a Laser Doppler Vibrometer in order to measure tungsten properties at high...

High pressure and high temperature behavior of TiAlN

Regeneration of ortho-chlorophenol-exhausted activated carbons with liquid water at high pressure and temperature.

A study was undertaken of the regeneration of three activated carbons exhausted with ortho-chlorophenol. The regeneration process was carried out using liquid water at 623 K and 150 atm in the absence of oxygen. The efficiency of this procedure was analyzed by determining the rate and amount of ortho-chlorophenol adsorbed in successive adsorption-regeneration cycles. The present procedure showe...