CARBON NANOTUBES REINFORCED ZIRCONIA COMPOSITES FOR ARTFICIAL HIP JOINTS BEARING SURFACES

نویسندگان

چکیده

This research focuses on the properties and capabilities of carbon nanotubes (CNTs) as reinforcing agents in ceramic composite bearing components. The addition CNT to pure ceramics can form composites with much better performance than conventional for various applications. study was started from their use a component total hip arthroplasty damage that occurred after implantation. covers factors cause degradation introduction CNTs new materials widely used sintering method heat pressure parameters during process meet standards manufacture Total Hip Arthroplasty (THA) component. contact buckling behaviors influence friction properties. presence until 20 wt% exhibited improve wear resistance lower increase weight percent. reinforced coating might be capable withstand high load-bearing conditions. Plastic deformation one critical processes mechanism. Other are cracking chemical reaction. microstructures porosity take an important role indicating mechanisms.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Carbon Nanotubes Reinforced Composites for Biomedical Applications

This review paper reported carbon nanotubes reinforced composites for biomedical applications. Several studies have found enhancement in the mechanical properties of CNTs-based reinforced composites by the addition of CNTs. CNTs reinforced composites have been intensively investigated for many aspects of life, especially being made for biomedical applications. The review introduced fabrication ...

متن کامل

Nano-engineered Composites Reinforced with Aligned Carbon Nanotubes (CNTs)

We present the implementation of aligned carbon nanotubes (CNTs) as a method to enhance properties of traditional advanced composites. The hybrid composites are 3-dimensional architectures of aligned CNTs, and existing advanced fibers and polymeric resins creating nanoengineered composites. Our work to date has focused on interlaminar strength and toughness, and electrical and thermal conductiv...

متن کامل

Finite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites

An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...

متن کامل

Carbon Fiber Reinforced Bismaleimide Composites

Bismaleimide (BMI) resins are developed very rapidly due to the demands of the defense and aerospace industries. They are cross-linked polymers which process like epoxy resins but have an upper use temperature of 230°C, compared to the epoxy upper use temperature of 175°C. Also due to the available intrinsic properties of BMI resins such as higher thermal stability and lower toxicity than those...

متن کامل

Chemical Vapor Deposition of Carbon Nanostructures and Carbon Nanotubes-Reinforced Composites

The vapor deposition of open-networked carbon nanostructures and carbon nanotubes (CNTs)-reinforced composites have been developed and studied parametrically. Carbon nanostructures, including nano-tubes, nano-foams, nanoparticles, and nano-walls, have been deposited on catalyst-assisted substrates using microwave plasma electron cyclotron resonance-chemical vapor deposition (ECR-CVD) system at ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International journal of advanced research

سال: 2021

ISSN: ['2707-7802', '2707-7810']

DOI: https://doi.org/10.21474/ijar01/12794