Carbon Dioxide Reduction on a Metal-Supported Solid Oxide Electrolysis Cell
نویسندگان
چکیده
منابع مشابه
Selective catalytic reduction of sulfur dioxide by carbon monoxide over iron oxide supported on activated carbon
The selective reduction of sulfur dioxide with carbon monoxide to elemental sulfur was studied over ACsupported transition-metal oxide catalysts. According to the study, Fe2O3 /AC was the most active catalyst among the 4 AC-supported catalysts tested. By using Fe2O3 /AC, the best catalyst, when the feed conditions were properly optimized (CO/SO2 molar ratio = 2:1; sulfidation temperature, 400 ◦...
متن کاملSteam Electrolysis Using a Microtubular Solid Oxide Fuel Cell
Reversible operation of a microtubular solid oxide fuel cell SOFC with high electrochemical efficiency is reported. These devices can ideally produce hydrogen from electricity and steam solid oxide electrolyser SOE and then use the stored hydrogen to generate electricity and heat SOFC , acting as a storage device for the electrical energy. A fuel-electrode-supported Ni–yttriastabilized zirconia...
متن کاملTitanium dioxide-supported non-precious metal oxygen reduction electrocatalysts
1. Materials synthesis and characterization Catalyst synthesis: Commercially available TiO 2 , with the particle size ranging from 50 to 150 nm and in the B.E.T. surface area from 50 to 100 m 2 /g, was first treated in 0.5 M HCl solution for 24 hours to remove impurities. In a typical approach to the synthesis of the PANI-Fe-TiO 2 catalyst, 2.0 mL aniline was first dispersed in 0.5 M HCl soluti...
متن کاملTitanium dioxide-supported non-precious metal oxygen reduction electrocatalyst.
A new non-precious metal oxygen reduction catalyst was developed via heat treatment of in situ polymerized polyaniline onto TiO(2) particles in the presence of Fe species. The TiO(2) provides for improved performance relative to a carbon black-based catalyst and, at a high catalyst loading, allows for reducing the performance gap between non-precious-metal catalyst and Pt/C to ca. 20 mV in RDE ...
متن کاملThree-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell
In this article three dimensional modeling of a planar solid oxide fuel cell (SOFC) was investigated. The main objective was to attain the optimized cell operation. SOFC operation simulation involves a large number of parameters, complicated equations, (mostly partial differential equations), and a sophisticated simulation technique; hence, a finite element method (FEM) multiphysics approach ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2019
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2018-430