Carbon Coatings Deposited on Prosthodontic Ni-Cr Alloy
نویسندگان
چکیده
The study discusses the results of investigations conducted on carbon coatings applied a prosthodontic alloy Ni-Cr. Carbon with thickness about 1000 nm were deposited by means RF PACVD method titanium interlayer magnetron spray dispersion. underwent microscopic examinations, as well structural tests use Raman spectrometry, mechanical properties, adhesion and corrosion tests; also, bacterial to sample surface was determined. It can be inferred from performed studies that obtained exhibit properties which allow them used for elements. coatings’ metallic substrate made Ni-Cr equaled 150 mN. examined clearly improve resistance reduce number bacteria adhering surfaces. Taking all this into account, it stated potentially protect metal prosthetic restorations.
منابع مشابه
Tribological behavior of sputter-deposited MoSX/Ni coatings
AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...
متن کاملTi-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels
In this study, physical vapor deposition (PVD) Ti-Cr-N coatings were deposited at two different temperatures 100 and 400ºC on hardened and tempered tool steel substrates. The influence of the applied deposition temperature on the physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and Young’s modulus were evaluated. Phase compositions were st...
متن کاملEarly bone apposition in vivo on plasma-sprayed and electrochemically deposited hydroxyapatite coatings on titanium alloy.
Three different implants, bare Ti-6Al-4V alloy, Ti-6Al-4V alloy coated with plasma-sprayed hydroxyapatite (PSHA), and Ti-6Al-4V alloy coated with electrochemically deposited hydroxyapatite (EDHA), were implanted into canine trabecular bone for 6 h, 7, and 14 days, respectively. Environmental scanning electron microscopy study showed that PSHA coatings had higher bone apposition ratios than thos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied sciences
سال: 2021
ISSN: ['2076-3417']
DOI: https://doi.org/10.3390/app11104551