Carbon capture test unit design and development using amine-based solid sorbent
نویسندگان
چکیده
منابع مشابه
Carbon Capture Using Amine-modified Carbon Nanotubes
The increasing rise in the rate of both anthropogenic CO2 emissions and atmospheric CO2 concentration, combined with an evolving understanding of what this means for global climate change both now, and in the future, has increased the need for novel technologies for CO2 capture from large point sources. Current industry standards involve the use of amine solvents, which have a large parasitic l...
متن کاملCarbon dioxide capture using amine functionalized silica gel
Commercially available silica gel is chemically modified for carbon dioxide capture. Calcinated silica gel of certain particle size functionalized with amine using two different methods, wet impregnation and grafting via silane chemistry has been employed as a porous media. The prepared material is characterized by Fourier transform infrared, scanning electron microscopy, energy dispersive anal...
متن کاملAdvanced Modeling and Control of a Solid Sorbent-Based CO2 Capture Process
Solid sorbent-based CO2 capture from flue gas provides a novel alternative to traditional solvent-based processes due to potentially lower energy consumption for regeneration. Optimal operation of such a gas-solid flow process requires an advanced control framework for efficient disturbance rejection and setpoint tracking. This work focuses on the development of computationally fast and accurat...
متن کاملTeaching Unit Testing using Test-Driven Development
Of all testing levels, the unit level of testing has undergone the most recent and most dramatic change. With the introduction of new agile (aka, “lightweight”) development methods, such as XP (eXtreme Programming) came the idea of Test-Driven Development (TDD). TDD is a software development technique that melds program design, implementation and testing in a series micro-iterations that focus ...
متن کاملDevelopment of New Potassium Carbonate Sorbent for CO2 Capture under Real Flue Gas Conditions
In this paper, the development of a new potassium carbonateon alumina support sorbent prepared by impregnating K2CO3 with an industrial grade of Al2O3 support was investigated. The CO2 capture capacity was measured using real flue gas with 8% CO2 and 12% H2O in a fixed-bed reactor at a temperature of 65 °C using breakthrough curves. The developed sorbent showed an adsorption capacity of 66.2 mg...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Engineering Research and Design
سال: 2016
ISSN: 0263-8762
DOI: 10.1016/j.cherd.2016.06.020