Carbide grain growth in cemented carbides sintered with alternative binders
نویسندگان
چکیده
منابع مشابه
Cemented Carbides – a Success Story
After WW2, a huge market opened in the growing economies and cemented carbides contributed as tool materials and construction parts to their industrial development. Today, cemented carbides are the workhorses in all areas of the manufacturing industries: no factory without cemented carbide tools; no production of glass bottles, aluminium cans or plastic tubes which has not benefited from these ...
متن کاملGradient formation in cemented carbides with 85Ni:15Fe-binder phase
I POPULÄRVETENSKAPLIG SAMMANFATTNING II
متن کاملGrain growth kinetic of spark plasma sintered magnesia
In this research, the densification of magnesia nanopowder with a mean particle size of about 100 nm was investigated by spark plasma sintering undera pressures of 80 MPa and at temperature range from 1000 °C to 1400 °C and a heating rate of 50 °C/min for 20 minutes. The density of the samples slowly increased with increasing sintering temperatures to 1200 °C. Afterwards, with more increasing o...
متن کاملInfluence of Laser Pulse Number on the Ablation of Cemented Tungsten Carbides (WC-CoNi) with Different Grain Size "2279
The ultra-short pulse laser has attracted attention as an advanced tool for functionalizing surface topography, since it has high accuracy and results in little damage. In a previous study, some innovative patterns were introduced on cemented carbide surfaces, such as dimples, which are commonly used as oil reservoirs for bearings. The accuracy is not only related to the inherent features of th...
متن کاملDevelopment of Creep-Resistant Tungsten Carbide Copper Cemented Carbide
Fine-grained tungsten carbide copper (WC-Cu) cemented carbide was sintered via spark plasma sintering at 1773K using a fine WC powder with a mean particle size of 0.11 mm. The mechanical properties were compared with tungsten carbide cobalt (WC-Co) cemented carbide and a binderless WC-sintered material. The Vickers hardness and fracture toughness obtained by the indentation fracture method for ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Refractory Metals and Hard Materials
سال: 2020
ISSN: 0263-4368
DOI: 10.1016/j.ijrmhm.2019.105088