Caracterization of Liquid Smoke Bamboo Waste with Pyrolysis Method
نویسندگان
چکیده
منابع مشابه
chemical recycling of polycarbonate waste using conventional heating and microwave assisted method
پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...
Fast Pyrolysis of Enzymatic/mild Acidolysis Lignin from Moso Bamboo
The characteristics of enzymatic/mild acidolysis lignin (EMAL) isolated from moso bamboo were investigated using pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Pyrolysis temperature as a factor on products was studied, and the pyrolysis mechanism was inferred with respect to the dominating products. Research results showed that pyrolysis products derived from EMAL pyrolysis were mai...
متن کاملVacuum pyrolysis of waste tires with basic additives.
Granules of waste tires were pyrolyzed under vacuum (3.5-10 kPa) conditions, and the effects of temperature and basic additives (Na2CO3, NaOH) on the properties of pyrolysis were thoroughly investigated. It was obvious that with or without basic additives, pyrolysis oil yield increased gradually to a maximum and subsequently decreased with a temperature increase from 450 degrees C to 600 degree...
متن کاملRecovery of Hydrocarbon Liquid from Waste High Density Polyethylene by Thermal Pyrolysis
Thermal degradation of waste plastics in an inert atmosphere has been regarded as a productive method, because this process can convert waste plastics into hydrocarbons that can be used either as fuels or as a source of chemicals. In this work, waste high-density polyethylene (HDPE) plastic was chosen as the material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse was...
متن کاملPyrolysis of waste tyres: a review.
Approximately 1.5 billion tyres are produced each year which will eventually enter the waste stream representing a major potential waste and environmental problem. However, there is growing interest in pyrolysis as a technology to treat tyres to produce valuable oil, char and gas products. The most common reactors used are fixed-bed (batch), screw kiln, rotary kiln, vacuum and fluidised-bed. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IPTEK Journal of Proceedings Series
سال: 2019
ISSN: 2354-6026
DOI: 10.12962/j23546026.y2019i3.5853