Capillary Viscometer for Gases of Steady Flow Type

Design of a capillary viscometer with numerical and computational methods

A high temperature and shear rate capillary viscometer has been designed, constructed and recently commissioned. This device will be used to measure the viscosity of semi-solid metals under the high temperature and shear rate conditions, similar to those found in industry. Design criteria for the device included a requirement for a highly controllable temperature (±1oC) up to 650oC, capability ...

Automated measurement of plasma viscosity by capillary viscometer.

Plasma viscosity has several advantages over the erythrocyte sedimentation rate as a measurement of an acute phase response of more than 24 hours' duration. A new capillary viscometer (Coulter Viscometer II), which gives an automated measurement of plasma viscosity, was compared with the selected manual method (Harkness viscometer) of the International Committee for Standardization in Haematolo...

Choked Flow of Gases

• The actual flow rate is constant for the outlet pressure range of 35.30 psig to as low as a complete vacuum. The flow rate can be obtained from the charts on pages 16-18; e.g. for an orifice of .010" diameter and with 80 psig inlet pressure, the choked flow rate is 8.4 scfh (page 16). This flow rate will be constant for all outlet pressure conditions between 35.30 psig and full vacuum. 0 1 .5...

Comparison of three different numerical schemes for 2D steady incompressible lid-driven cavity flow

In this study, a numerical solution of 2D steady incompressible lid-driven cavity flow is presented. Three different numerical schemes were employed to make a comparison on the practicality of the methods. An alternating direction implicit scheme for the vorticity-stream function formulation, explicit and implicit schemes for the primitive variable formulation of governing Navier-Stokes equatio...

Capillary blood gases: to arterialize or not.