Capillary convection in pulsed – butt welding of miscible dissimilar couple
نویسندگان
چکیده
منابع مشابه
Modeling of input-output Relationships for electron beam butt welding of dissimilar materials using Neural Networks
Electron beam butt welding of stainless steel (SS 304) and electrolytically tough pitched (ETP) copper plates was carried out according to central composite design of experiments. Three input parameters, namely accelerating voltage, beam current and weld speed were considered in the butt welding experiments of dissimilar metals. The weld-bead parameters, such as bead width and depth of penetrat...
متن کاملEffect of Butt Joint Distortion and Comparison Study on Ti/Al Dissimilar Metal Using Laser Beam Welding
In general, it is desirable to finish the weld quickly, before a large volume of surrounding metal heats up and expands. The welding process used, type, welding current and speed of travel, thus, affect the degree of shrinkage and distortion of a weldment. The use of mechanized welding equipment reduces welding time, metal affected zone and consequently distortion. This article helps to define ...
متن کاملFemtosecond fiber laser welding of dissimilar metals.
In this paper, welding of dissimilar metals was demonstrated for the first time, to the best of our knowledge, by using a high-energy high-repetition-rate femtosecond fiber laser. Metallurgical and mechanical properties were investigated and analyzed under various processing parameters (pulse energy, repetition rate, and welding speed). Results showed that the formation of intermetallic brittle...
متن کاملCorrection of Butt-welding Induced Distortions by Laser Forming
Welding-induced distortion is an intrinsic phenomenon arising due to the thermally induced strain distributions in the weld and surrounding material. The distortion can be minimized during the pre-process, real-time, or postprocess stages. In the present paper, the laser forming (LF) technology is utilized for the post correction of welding-induced distortion. The out-of-plane distortion can be...
متن کاملCorrection of Butt-Welding induced Distortion by Laser Forming
Welding-induced distortion is an intrinsic problem arising due to the mismatch of thermal expansions in the weld and surrounding material. The distortion can be minimized through the pre-process, in process, or post-process methodology. In the present paper, the laser forming (LF) technology is utilized for the post correction of the welding-induced distortion. Three types of weld paths are app...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
سال: 2016
ISSN: 0954-4062,2041-2983
DOI: 10.1177/0954406216637086