Capacity fade in Sn–C nanopowder anodes due to fracture
نویسندگان
چکیده
منابع مشابه
Capacity Fade Analysis of Sulfur Cathodes in Lithium–Sulfur Batteries
Rechargeable lithium-sulfur (Li-S) batteries are receiving ever-increasing attention due to their high theoretical energy density and inexpensive raw sulfur materials. However, their rapid capacity fade has been one of the key barriers for their further improvement. It is well accepted that the major degradation mechanisms of S-cathodes include low electrical conductivity of S and sulfides, pre...
متن کاملAnalysis of capacity fade in a lithium ion battery
Two parameter estimation methods are presented for online determination of parameter values using a simple charge/discharge model of a Sony 18650 lithium ion battery. Loss of capacity and resistance increase are both included in the model. The first method is a hybrid combination of batch data reconciliation and moving-horizon parameter estimation. A discussion on the selection of tuning parame...
متن کاملStatistical Estimation of Fade Depth and Outage Probability Due to Multipath Prop- Agation in Southern Africa
This study builds on the earlier work by Odedina and Afullo on Multipath fading in Durban. Their work was based on multipath measurements in Durban over a 6.73 km Line-of-Sight (LOS) link. This submission uses the geoclimatic factor approach and ITU-R recommendations P530-14 to obtain the multipath fading occurrence in five cities in South Africa, including Durban. Three-year radiosonde data is...
متن کاملCapacity fade analysis of a lithium ion cell
A physics-based single particle model was used to simulate the life cycling data of a lithium ion cell. The simulation indicates that there are robably three stages of capacity fade in a lithium ion cell used at low rates. In the first stage, lithium ions are lost to a film formation reaction (e.g. EI formation) and, consequently, the cathode becomes less intercalated during cycling. In the sec...
متن کاملMathematical modeling of the capacity fade of Li-ion cells
A capacity fade prediction model has been developed for Li-ion cells based on a semi-empirical approach. Correlations for variation of capacity fade parameters with cycling were obtained with two different approaches. The first approach takes into account only the active material loss, while the second approach includes rate capability losses too. Both methods use correlations for variation of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Power Sources
سال: 2012
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2011.09.025