Cantilever Beam Static and Dynamic Response Comparison with Mid-Point Bending for Thin MDF Composite Panels
نویسندگان
چکیده
منابع مشابه
Comparison of Wood Composite Properties Using Cantilever-Beam Bending
Wood-based composite panels generally are first tested out-of-plane in the primary panel direction followed by the cross panel direction, but rarely edgewise. While most applications use wood-based composites in the flat-wise orientation and only need the out-of-plane properties, there are construction configurations where edgewise properties are needed for improved design configurations. A squ...
متن کاملA Clamped Three-point Bending Setup for Fatigue of Thin Composite Laminates
Usually, fatigue tests on fibre-reinforced composites are performed in uni-axial tension/tension or tension/compression fatigue [1], providing the S-N data. Although bending fatigue tests are not widely accepted as a standard, they are used a lot for research purposes [2] and they do have some important advantages [3]. In case of three-point bending fatigue, the history of bending force versus ...
متن کاملLarge Deflection Static Analysis of a Cantilever Beam Subjected to a Point Load
This work presents geometrically non-linear static analysis of a cantilever beam subjected to a non-follower transversal point load at the free end of the beam. The material of the beam is assumed as isotropic and hyperelastic. In this study, finite element model of the beam is constructed by using total Lagrangian finite element model of two dimensional continua for a twelve-node quadratic ele...
متن کاملTermite Resistance of MDF Panels Treated with Various Boron Compounds
In this study, the effects of various boron compounds on the termite resistance of MDF panels were evaluated. Either borax (BX), boric acid (BA), zinc borate (ZB), or sodium perborate tetrahydrate (SPT) were added to urea-formaldehyde (UF) resin at target contents of 1%, 1.5%, 2% and 2.5% based on dry fiber weight. The panels were then manufactured using 12% urea-formaldehyde resin and 1% NH(4)...
متن کاملElastic Stress Analysis of Composite Cantilever Beam Loaded Uniformly
In this investigation an elastic stress analysis is carried out a woven steel fiber reinforced thermoplastic cantilever beam loaded uniformly at the upper surface. The composite beam material consists of low density polyethylene as a thermoplastic (LDFE, f.2.12) and woven steel fibers. Granules of the polyethylene are put into the moulds and they are heated up to 160°C by using electrical resis...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BioResources
سال: 2012
ISSN: 1930-2126
DOI: 10.15376/biores.8.1.115-129