Calibration of surface roughness standards
نویسندگان
چکیده
منابع مشابه
Calibration of Large Square Standards
In this paper the principle and device NME 90 for large square standards calibration is described. The self-calibration methods of measurement are used. They allow very low uncertainty of the square calibration with mathematical elimination of measuring column straightness deviations. The process of measurement is full automated and controlled by PC, which collects and evaluates measured data. ...
متن کاملEffect of surface roughness on steel-steel dry friction coefficient
The influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. A testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. According to the results of the experiments, dry friction coefficient is affected by both magnitude and...
متن کاملTHE EFFECT OF OPACIFIERS ON SURFACE ROUGHNESS OFCERAMIC GLAZES
Surface smoothness of ceramic glazes is always an important characteristic of ceramic glazes as a point of surface engineering studies. Surface roughness affects chemical resistivity, glossiness and stainabiliy of glazes. In fact, less surface roughness improves cleanability of the surface by the least usage amount of detergents. In this investigation, surface topography of two common opaque gl...
متن کاملCalibration of dissipation factor standards
Working standards for dissipation factor (D) obtained by connecting a shielded three-tenninal capacitor in series with a shielded precision resistor have been developed for calibration purposes. Precision conductance boxes have been built for use with a single three-tenninallOOO pF gas capacitor standard to create dissipation factor standards having values from 2 x 10-5 to 1 X 10-2. The design ...
متن کاملSurface Roughness Impedance
The next generation of linac-based free electron lasers will use very short bunches with a large peak current. For such beams, the impedance caused by submicron imperfections in the vacuum beam tube may generate an additional energy spread within the bunch. A review of two mechanisms of the roughness impedance is given with the emphasis on the importance of the high-aspect ratio property of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metrologia
سال: 2015
ISSN: 0026-1394,1681-7575
DOI: 10.1088/0026-1394/53/1a/04001