Calibration methods for rotating shadowband irradiometers and optimizing the calibration duration
نویسندگان
چکیده
منابع مشابه
Calibration Methods for Silicon Photodiode Pyranometers used in Rotating Shadowband Radiometers
Silicon photodiode pyranometers have been studied extensively for application in solar energy resource assessment instruments. An example is the LI-COR, Inc. 200SZ detector that is used in rotating shadowband radiometers. While excellent results have been achieved LI-COR, Inc. calibration methods are not fully disclosed and LI-COR’s stated +/5% accuracy is less than desirable. This research aim...
متن کاملThe Calibration Index and Taxonomy for Robot Kinematic Calibration Methods
The major approaches toward kinematic calibration are unified by considering an end-point measurement system as forming a joint and closing the kinematic loop. A calibration index is introduced, based on the mobility equation, that considers sensed and unsensed joints and single and multiple loops and expresses the surplus of measurements over degrees of freedom at each pose. Past work using op...
متن کاملCalibration method for rotating-analyzer ellipsometers
One of the main sources of errors in ellipsometry is inaccurate calibration; if the plane of incidence is not known correctly, all azimuthal angles of the optical components involved, such as the polarizer, the analyzer, and sometimes the compensator, contain errors. Thus calibration errors proliferate, leading ultimately to errors in the measured quantities A and *. Not withstanding the fact t...
متن کاملAerosol ultraviolet absorption experiment „2002 to 2004..., part 1: ultraviolet multifilter rotating shadowband radiometer calibration and intercomparison with CIMEL sunphotometers
Brent Holben NASA Goddard Space Flight Center Greenbelt, Maryland 20771 Abstract. Radiative transfer calculations of UV irradiance from total ozone mapping spectrometer (TOMS) satellite data are frequently overestimated compared to ground-based measurements because of the presence of undetected absorbing aerosols in the planetary boundary layer. To reduce these uncertainties, an aerosol UV abso...
متن کاملCalibration of Load and Resistance Factors for Reinforced Concrete
Current approach for designing of reinforced concrete members is based on the load and resistance factor. However the load and resistance parameters are random variables, the constant values have been designated for them in the designing procedure. Assuming these factors as the constants, will be led to the unsafe and uneconomical designs. Safe designing of structures requires appropriate recog...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Atmospheric Measurement Techniques
سال: 2016
ISSN: 1867-8548
DOI: 10.5194/amt-9-1601-2016