CAE : Discontinuous Fiber Reinforced Plastic
نویسندگان
چکیده
منابع مشابه
A novel CACD/CAD/CAE integrated design framework for fiber-reinforced plastic parts
This work presents a novel CACD/CAD/CAE integrated framework for design, modeling, and optimization of fiber-reinforced plastic parts, which can greatly enhance the current design practice by realizing partial automation and multi-stage optimization. To support this framework, a new heterogeneous feature model (HFM) has been developed to model the fiber-reinforced objects and to be transferred ...
متن کاملFiber reinforced plastic composites using recycled materials
This work investigates the feasibility of using recycled high density polyethylene (rHDPE), recycled polypropylene (rPP) and old newsprint fiber (ONP) to manufacture fiber reinforced composites. The boards were made through air-forming and hot press. The effects of the fiber loading and coupling agent content on tensile, flexural, internal bond properties and water absorption and thickness swel...
متن کاملDiscontinuous fiber-reinforced composites above critical length.
Micromechanical physics of critical fiber length, describing a minimum filament distance for resin impregnation and stress transfer, has not yet been applied in dental science. As a test of the hypothesis that 9-micron-diameter, 3-mm-long quartz fibers would increase mechanical strength over particulate-filled composites, photocure-resin-pre-impregnated discontinuous reinforcement was incorpora...
متن کاملfiber reinforced plastic composites using recycled materials
this work investigates the feasibility of using recycled high density polyethylene (rhdpe), recycled polypropylene (rpp) and old newsprint fiber (onp) to manufacture fiber reinforced composites. the boards were made through air-forming and hot press. the effects of the fiber loading and coupling agent content on tensile, flexural, internal bond properties and water absorption and thickness swel...
متن کاملMachinability of glass fiber reinforced plastic (GFRP) composite materials
This paper deals with the study of machinability of GFRP composite tubes of different fiber orientation angle vary from 30 to 90. Machining studies were carried out on an all geared lathe using three different cutting tools: namely Carbide (K-20), Cubic Boron Nitride (CBN) and Poly-Crystalline Diamond (PCD). Experiments were conducted based on the established Taguchi’s Design of Experiments (DO...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Seikei-Kakou
سال: 2019
ISSN: 0915-4027,1883-7417
DOI: 10.4325/seikeikakou.31.272