CAD-Based Automated Design of FEA-Ready Cutting Tools
نویسندگان
چکیده
منابع مشابه
Algorithms for CAD Tools VLSI Design
Due to advent of Very Large Scale Integration (VLSI), mainly due to rapid advances in integration technologies the electronics industry has achieved a phenomenal growth over the last two decades. Various applications of VLSI circuits in high-performance computing, telecommunications, and consumer electronics has been expanding progressively, and at a very hasty pace. Steady advances in semi-con...
متن کاملFea-based Design of Heterogeneous Objects
Finite Element Analysis (FEA) is an important step for the design of structures or components formed by heterogeneous objects such as multi-materials, Functionally Graded Materials (FGMs), etc. The main objective of the FEA-based design of heterogeneous objects is to simultaneously optimize both geometry and material distribution over the design domain (e.g., Homogenization Design Method). Howe...
متن کاملFEA-based design study for optimising non- rigid error detection on machine tools
Non-rigid-body behaviour can have a considerable effect on the overall accuracy performance of machine tools. These errors originate from bending of the machine structure due to change in distribution of its own weight or from movement of the workpiece and fixture. These effects should be reduced by good mechanical design, but residual errors can still be problematic due to realistic material a...
متن کاملThe Effects of ZrO2 or Tic on the Performance of the Alumina-Based Ceramic Cutting Tools
Two types of alumina-based cutting tools with compositions of 90 vol.% Al2O3+10 vol.% ZrO2 and 80 vol.% A12O3+20 vol.% TiC are produced by isostatic pressing and sintering technique. The effects of these additives on the mechanical properties and cutting performance of these materials are investigated. The tool life in both materials is examined under identical conditions on cutting a grey cast...
متن کاملA feature and script based integration of CAD and FEA to support design of variant rich products
The focus of the research presented in this article has been an integration of a CADsystem and a FEA pre-processor to automatically develop a complete FEA-models in order to make simulation based design possible. The article presents a prototype system that was developed to automate the simulation of the behavior of ski-racks mounted on cars during collision. This type of simulations requires m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Manufacturing and Materials Processing
سال: 2020
ISSN: 2504-4494
DOI: 10.3390/jmmp4040104