Cable-Driven Parallel Robot with Reconfigurable End Effector Controlled with a Compliant Actuator
نویسندگان
چکیده
منابع مشابه
Four-cable-driven parallel robot
This paper presents design and kinematic analysis for a cable-driven parallel robotic (CDPR) manipulator with four cables, The CDPR manipulator produces a planar motion including two translational and one rotational degrees of freedom. To move the end-effector of CDPR, its kinematic structure is analyzed and the inverse kinematics is formulated in the closed-form solution. The experimental test...
متن کاملa new type-ii fuzzy logic based controller for non-linear dynamical systems with application to 3-psp parallel robot
abstract type-ii fuzzy logic has shown its superiority over traditional fuzzy logic when dealing with uncertainty. type-ii fuzzy logic controllers are however newer and more promising approaches that have been recently applied to various fields due to their significant contribution especially when the noise (as an important instance of uncertainty) emerges. during the design of type- i fuz...
15 صفحه اولTension Optimization for a Cable-Driven Parallel Robot with Non- Negligible Cable Mass
This paper addresses the cable tension distributions of a cable-driven parallel robot with non-negligible cable mass for large dimension mechanisms. A well-known model which describes the profile of a cable under the action of its own weight allows us to take the cable sags into account. In addition, an approach to computing the cable tensions is presented, in which there are two major steps to...
متن کاملDesign and Development of a Reconfigurable Cable Parallel Robot
This paper presents a reconfigurable cable parallel robot, which spatial topology can be reconfigured through managing the branch numbers and the hoisting points of the end-effector. An experimental prototype of the reconfigurable cable parallel robot is designed and developed. A typical configuration of the reconfigurable cable parallel robot is analyzed as a case study. The finite element ana...
متن کاملCalibration of a fully-constrained parallel cable-driven robot
An identi cation of the model parameters for a parallel cable-driven robot is performed by using both a calibration and a self-calibration approach. The manipulator studied is based on a parallel architecture having 8 cables to control the 6 degrees of freedom of its mobile platform so that the mobile platform is fully constrained by the cables. Under some hypotheses on cable properties, the in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2018
ISSN: 1424-8220
DOI: 10.3390/s18092765