C4S Nanosheet: A Potential Anode Material for Potassium-Ion Batteries
نویسندگان
چکیده
Potassium ion batteries (KIBs) have received increasing popularity owing to their distinct advantages. We discover a hitherto unknown C4S nanosheet, novel carbon-based material with carbon and sulfur consisting of pentagons hexagons rings. The proposed nanosheet is highly stable dynamically, thermodynamically, mechanically, chemically, according first-principles calculations. Moreover, the graphene-like prospective KIBs anode material, which has metallic band structure, relatively low diffusion barrier (0.07 eV), large capacity (1340 mA h g−1), an acceptable average voltage (0.44 V). Finally, we demonstrate good cycling stability nanosheet. Our findings indicate that potentially favorable material.
منابع مشابه
Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملNaTiO2: a layered anode material for sodium-ion batteries
Lithium-ion batteries are currently the energy storage technology of choice in portable electronic devices and electric vehicles. In recent years, sodium-ion batteries have been actively restudied as a promising alternative because of the abundance of sodium resources and the high capacity cathodes available. But as graphitic carbon can not be used as anode material, as it is in lithium batteri...
متن کاملSynthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملDefective Ti2Nb10O27.1: an advanced anode material for lithium-ion batteries.
To explore anode materials with large capacities and high rate performances for the lithium-ion batteries of electric vehicles, defective Ti2Nb10O27.1 has been prepared through a facile solid-state reaction in argon. X-ray diffractions combined with Rietveld refinements indicate that Ti2Nb10O27.1 has the same crystal structure with stoichiometric Ti2Nb10O29 (Wadsley-Roth shear structure with A2...
متن کاملNa2Ti6O13: a potential anode for grid-storage sodium-ion batteries.
The ultra-fast (30C or 2 min) rate capability and impressive long cycle life (>5000 cycles) of Na2Ti6O13 are reported. A stable 2.5 V sodium-ion battery full cell is demonstrated. In addition, the sodium storage mechanism and thermal stability of Na2Ti6O13 are discussed.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Batteries
سال: 2023
ISSN: ['2313-0105']
DOI: https://doi.org/10.3390/batteries9060288