C4.4 - Characterization of a Piezo-Resistive MEMS Microphone for Aero-Acoustic Measurements
نویسندگان
چکیده
منابع مشابه
A MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کاملFabrication and Characterization of a New MEMS Capacitive Microphone using Perforated Diaphragm
In this paper, a novel single-chip MEMS capacitive microphone is presented. The novelties of this method relies on the moveable aluminum (Al) diaphragm positioned over the backplate electrode, where the diaphragm includes a plurality of holes to allow the air in the gap between the electrode and diaphragm to escape and thus reduce acoustical damping in the microphone. Spin-on-glass (SOG) was us...
متن کاملA Piezoresistive MEMS Sensor for Acoustic Noise Measurements
A MEMS piezoresistive acoustic sensor has been developed for measurement of jet screech noise. The new sensor was calibrated in the sound field of an air siren. Two sensors with a size of 510 and 710 pm were tested and compared to commercial sensors. The results show that the MEMS sensors are five to eight times more sensitive than the smallest commercially available piezoresistive sensors. Fur...
متن کاملThe Effect of Corrugations on Mechanical Sensitivity of Diaphragm for MEMS Capacitive Microphone
In this paper the effect of corrugated diaphragm on performance of MEMS microphone is described. The corrugated diaphragm is modeled in order to improve the sensitivity of micromachined silicon acoustic sensor. Analytical analyzes have been carried out to derive mathematic expressions for the mechanical sensitivity and displacement of corrugated diaphragm with residual stress. It is shown that ...
متن کاملFree-field Calibration of Mems Microphone Array Used for Acoustic Holography
The paper deals with method and methodology for calibration of the whole microphone array without the need of dismounting of each microphone and calibrating separately. This situation is usual with MEMS transducers which cannon be dismantled from the frame. The method is based on generation of spherical acoustic wave propagating in free-field and synchronously received by all microphones in the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Lectures
سال: 2023
ISSN: ['2116-5289']
DOI: https://doi.org/10.5162/smsi2023/c4.4