Bypassing Energy Barriers in Fiber-Polymer Torrefaction
نویسندگان
چکیده
منابع مشابه
Bypassing Passkey Authentication in Bluetooth Low Energy
Since the attack runs on the Security Manager layer, it can reuse a lot of the existing network stack that is already in place for this approach. This namely concerns everything bellow HCI [1]. Actually, the whole procedure starting with the authentication bypass and continuing to data injection (which would be a regular communication anyway) can be done using a general Bluetooth 4.0 Smart Read...
متن کاملMicrostructured polymer fiber laser.
A microstructured polymer optical fiber doped with Rhodamine 6G dye was fabricated and demonstrated as an optical amplifier and a fiber laser. As an amplifier, the fiber achieved a gain in excess of 30 dB. As a pulsed fiber laser, the fiber exhibited a threshold of 20 microJ, a slope efficiency of 18%, and a lifetime as high as 130,000 shots at 10 Hz. The maximum output energy was 16 microJ. Th...
متن کاملProduct characteristics from the torrefaction of oil palm fiber pellets in inert and oxidative atmospheres.
The aim of this work was to study the characteristics of solid and liquid products from the torrefaction of oil palm fiber pellets (OPFP) in inert and oxidative environments. The torrefaction temperature and O2 concentration in the carrier gas were in the ranges of 275-350°C and 0-10 vol%, respectively, while the torrefaction duration was 30 min. The oxidative torrefaction of OPFP at 275°C dras...
متن کاملTorrefaction and low temperature carbonization of oil palm fiber and Eucalyptus in nitrogen and air atmospheres.
Torrefaction is a pretreatment method for upgrading biomass as solid fuels. To provide flexible operations for effectively upgrading biomass at lower costs, the aim of this study was to investigate the properties of oil palm fiber and eucalyptus pretreated in nitrogen and air atmospheres at temperatures of 250-350°C for 1h. Based on energy and solid yield and introducing an energy-mass co-benef...
متن کاملDiffusion Barriers in the Squid Nerve Fiber
The squid nerve barriers are formed by (a) the axolemma (membrane of the axon proper), a membrane 80 A thick perforated by cylindrical pores 4.0 to 4.5 A radius, and (b) the Schwann layer, constituted of numerous cells forming a layer one cell thick, crossed by 60 A wide slit channels. If a molecule present in the axoplasm has to reach the extraneural space, it has to pass (a) the pores, and (b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frontiers in Energy Research
سال: 2021
ISSN: 2296-598X
DOI: 10.3389/fenrg.2021.643371