Butt Joining of Bi-Layered Aluminum Sheets through Friction Stir Welding: Tensile Stresses, Bending Stresses, Residual Stresses, and Fractrography
نویسندگان
چکیده
منابع مشابه
Residual Stresses in Friction Stir Welding
Friction stir welding is an innovative joining process being developed for use in aerospace manufacturing. Like most welding processes there exist problems with post-weld residual stresses and subsequent geometrical distortion. The residual stress-state of a welded component can be modified using suitably applied mechanical tensioning and thus distortion can be reduced or eliminated. In the pre...
متن کاملA Study of Residual Stresses and Microstructure in 2024-T3 Aluminum Friction Stir Butt Welds
Three-dimensional residual stress mapping of an aluminum 2024-T3 arcan specimen, butt-welded by the friction stir technique, was performed by neutron diffraction. Results indicate that the residual stress distribution profiles across the weld region are asymmetric with respect to the weld centerline, with the largest gradients in the measured residual stress components occurring on the advancin...
متن کاملNumerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel
Three-dimensional nonlinear thermal and thermo-mechanical numerical simulations are conducted for the friction stir welding (FSW) of 304L stainless steel. The finite element analysis code—WELDSIM, developed by the authors specifically for welding simulation, was used. Two welding cases with tool rotational speeds of 300 and 500 rpm are analyzed. The objective is to study the variation of transi...
متن کاملResidual Stresses in Friction Stir Welding: Numerical Simulation and Experimental Verification
In the present paper the effects of the thermal and mechanical actions on the residual stress field occurring in friction stir welding (FSW) of AA7075-T6 were investigated. Both numerical and experimental analyses were carried out to highlight the metallurgical phenomena and induced residual stresses in FS welded blanks. The welding process was simulated using a continuous rigid-viscoplastic fi...
متن کاملInfluence of Friction Stir Welding residual stresses on the mechanical behaviour of aluminium stiffened panels
In this work, the longitudinal residual stresses that arise from FSW processes were measured by means of the Contour Method. These residual stresses were then introduced into a numerical simulation model based on the Finite Element Method (FEM), and their effect on the buckling collapse load of aluminium stiffened panels was assessed. The sensitivity of the models to initial geometrical imperfe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2019
ISSN: 2075-4701
DOI: 10.3390/met9040384