Burner rim geometry effect on flame stability
نویسندگان
چکیده
منابع مشابه
Investigation of Air Turbulence Intensity Effect on the Flame Structure in Different Flame Holder Geometry
In this paper, the effect of air turbulence intensity on the flame structure in various radii and lengths of a flame holder numerically studied. Finite volume method is used to solve the governing equations. The obtained numerical results using realizable k-ε and β-PDF models show a good agreement with the experimental data. The results show that flame holder with greater lengths yield shorter ...
متن کاملForced Response: Laminar Flat Flame Burner
Since a large number of physical parameters influence the flame dynamics in a full scale gas turbine combustor, it is virtually impossible to develop physically correlated reduced order models for flame dynamics by directly studying these complex reacting flows. Even the Rijke tube combustor system, though comprising of a simple geometry and a flat flame, shows a strong nonlinear coupling betwe...
متن کاملSimulation of Nitrogen Emissions in a Premixed Hydrogen Flame Stabilized on a Low Swirl Burner
There is considerable interest in developing fuel-flexible, low emissions turbines for power generation. One approach is based on burning a variety of lean premixed fuels with relatively low flame temperatures. Such flames can be stabilized in a low swirl burner configuration, for example, using a variety of fuels such as pure hydrogen and hydrogen-seeded hydrocarbon mixtures. However, many hyd...
متن کاملEffects of Flame Temperature on Combustion Instabilities of a Premixed Burner
Combustion instabilities in gas turbine has been a major setback in the quest for efficient and clean combustion. Accurate characterisation and prediction of these disturbances is required to suppress them either at the design stage or in a close loop control when the system is in operation. The use of flame transfer functions has been a common approach in different literatures. Flame temperatu...
متن کاملThe Effect of a Flame Holder Shape Modification Toward the Diffusion Flame Stability Zone Shift
The flame stability limit, which was involving the critical flow condition, lift off and blow out, could be affected by the burner geometry in the combustion system installation. Consequently a flame holder should be put in, to hold the flame as big as possible on a stable condition. The flame holder itself, is a device to hold the flame, whereas the flame holder could disturb the air and fuel ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/671/1/012003