Buckling of elastic structures under tensile loads

Monotonicity of Buckling Loads under Symmetrization

TOPOLOGY OPTIMIZATION OF STRUCTURES UNDER TRANSIENT LOADS

In this article, an efficient methodology is presented to optimize the topology of structural systems under transient loads. Equivalent static loads concept is used to deal with transient loads and to solve an alternate quasi-static optimization problem. The maximum strain energy of the structure under the transient load during the loading interval is used as objective function. The objective f...

Design of an Elastic Arthroplastic Disc Optimized under Different Loads

Introduction: Due to limitations of current treatments for degenerative disc disease, arthroplastic methods to repair the diseased disc have been proposed. The artificial disc is a mobile implant for degenerative disc replacement that attempts to lessen the degeneration of the adjacent elements following interbody fusion procedures. Because the success of artificial disc replacement depends on ...

Elastic response, buckling, and instability of microtubules under radial indentation.

We tested the mechanical properties of single microtubules by lateral indentation with the tip of an atomic force microscope. Indentations up to approximately 3.6 nm, i.e., 15% of the microtubule diameter, resulted in an approximately linear elastic response, and indentations were reversible without hysteresis. At an indentation force of around 0.3 nN we observed an instability corresponding to...

Elastic Buckling Behaviour of a Four-Lobed Cross Section Cylindrical Shell with Variable Thickness under Non-Uniform Axial Loads

The static buckling of a cylindrical shell of a four-lobed cross section of variable thickness subjected to non-uniform circumferentially compressive loads is investigated based on the thin-shell theory. Modal displacements of the shell can be described by trigonometric functions, and Fourier’s approach is used to separate the variables. The governing equations of the shell are reduced to eight...