BUCKLING AND POST-BUCKLING ANALYSIS OF RECTANGULAR PLATES UNDER PARTIAL EDGE LOADINGS
نویسندگان
چکیده
منابع مشابه
Analysis of Buckling Phenomenon under Different Loadings in Circular and Rectangular Plates
In this paper, buckling of the plates is investigated with different boundary conditions and alternating and axial compressive loadings by theoretical approach and numerical analysis with circular and rectangular closed sectional plates. In this research, governing differential equation will be used for thin plates under lateral and direct alternating loadings. Next, the mentioned equation woul...
متن کاملBuckling Analysis of Rectangular Laminated Composite Plates With An Edge Delamination Under Compressive Load
The buckling analysis of rectangular laminated composite plates with an edge delamination under in-plane compressive loading is performed using the finite element method. Such a plate may be considered as a simplified model of stiffener plates of a stiffened panel. The buckling load and buckling mode are obtained by solving an eigenproblem. In an unconstrained analysis, physically inadmissible ...
متن کاملBuckling of Rectangular Functionally Graded Material Plates under Various Edge Conditions
In the present paper, the buckling problem of rectangular functionally graded (FG) plate with arbitrary edge supports is investigated. The present analysis is based on the classical plate theory (CPT) and large deformation is assumed for deriving stability equations. The plate is subjected to bi-axial compression loading. Mechanical properties of FG plate are assumed to vary continuously along ...
متن کاملBuckling Analysis of Rectangular Plates under the Combined Action of Shear and Uniaxial Stresses
In the classical buckling analysis of rectangular plates subjected to the concurrent action of shear and uniaxial forces, the Euler shear buckling stress is generally evaluated separately, so that no influence on the shear buckling coefficient, due to the in-plane tensile or compressive forces, is taken into account. In this paper the buckling problem of simply supported rectangular plates, und...
متن کاملRefined Buckling Analysis of Rectangular Plates Under Uniaxial and Biaxial Compression
In the traditional buckling analysis of rectangular plates the classical thin plate theory is generally applied, so neglecting the plating shear deformation. It seems quite clear that this method is not totally appropriate for the analysis of thick plates, so that in the following the two variable refined plate theory proposed by Shimpi (2006), that permits to take into account the transverse s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Japan Society of Civil Engineers
سال: 1983
ISSN: 1884-4936,0385-5392
DOI: 10.2208/jscej1969.1983.337_47