Brittle Fracture of Welded High Tensile Mn-Si Steel
نویسندگان
چکیده
منابع مشابه
Microstructure and Tensile-Shear Properties of Resistance Spot-Welded Medium Mn Steel
The medium Mn steels are gaining increasing attention due to their excellent combination of mechanical properties and material cost. A cold-rolled 0.1C5Mn medium Mn steel with a ferrite matrix plus metastable austenite duplex microstructure was resistance spot-welded with various welding currents and times. The nugget size rose with the increase of heat input, but when the welding current excee...
متن کاملEffects of Bainitic Transformation Temperature on Microstructure and Tensile Properties of 0.6C-Si-Mn Steel
1 緒 言 工具や軸受,ゲ ージなどの精密部品では残留オーステ ナイ ト(rR)が存在すると硬 さや疲労寿命の低下,切 削性 不良あるいは経年形状変化を招きそれらの性質に有害な 影響をもたらす.そ れゆえ,こ れ らに使用する鋼では rRを 極力減少させ るのが好 ましい.し か しなが ら,rR が低合金構造用鋼に存在する場合には延性やじん性が向 上するとともに低温におけるぜい性破壊の防止に役立つ 場合が多い.そ れゆえ,最 近進んで熱処理によって人 為的にrRの 量や存在形態を調整 し混合組織 として優れ た機械的性質 を得ようとす る研究が しばしば見受 けら れ1)~6)る.こ のようなrRを 積極的に利用 しようとする方法 として,近 年Si-Mn鋼 をベイナイ ト変態させるオース テンパー処理が注 目されている. Si-Mn鋼 をベイナイ ト変態 させた場合多量のrRが ...
متن کاملHIGH TEMPERATURE TENSILE PROPERTIES OF NEW FE-CR-MN DEVELOPED STEEL
Nowadays, Ni-free austenitic stainless steels are being developed rapidly and high price of nickel is one of the most important motivations for this development. At present research a new FeCrMn steel was designed and produced based on Fe-Cr-Mn-C system. Comparative studies on microstructure and high temperature mechanical properties of new steel and AISI 316 steel were done. The results ...
متن کاملProspect of High-performance Welded Steel Bridge
The development of several grades of high-performance steel (HPS) with yield strengths of the order of 480 to 690 MPa (even more) with improved weldability, toughness and corrosion resistance have changed the scenario of fabrication of welded steel bridges for highway and rail bridge constructions. The HPS possesses the optimum combination of properties required to build cost-effective structur...
متن کاملNumerical Simulation of High Temperature Corrosion Processes in Mn, Cr, Si, Al – Alloyed Steel Samples
The grain boundary oxidation mechanism in hot rolled steel samples during cooling from 500 °C – 800 °C down to room temperature was mathematically modeled. Given a fixed temperature ramp, the migration of the atomic species (iron, oxygen and the alloying elements) has been calculated with the parabolic rate equation for diffusion. After each small time step, the data was transferred into the da...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1956
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.25.296