Boundary-Layer-Ingesting Inlet Flow Control
نویسندگان
چکیده
منابع مشابه
Characterization of Aerodynamic Performance of Boundary-layer-ingesting Inlet under Crosswind
NASA has been studying future transport concepts, envisioned to be technically realizable in the timeframe of 20202030, to meet environmental and performance goals. One concept receiving considerable interest involves a propulsion system embedded into a hybrid wingbody aircraft. While offering significant advantages in fuel savings and noise reduction by this concept, there are several technica...
متن کاملSwirl boundary layer and flow separation at the inlet of a rotating pipe
When a fluid enters a rotating circular pipe, an angular momentum or swirl boundary layer appears at the wall and interacts with the axial momentum boundary layer. In the centre of the pipe, the fluid is free of swirl and is accelerated due to boundary layer growth. Below a critical flow number, defined as the ratio of average axial velocity to circumferential velocity of the pipe, there is flo...
متن کاملBoundary Layer Control at Upstream Casing Wall of Impeller Inlet to Improve Performance Characteristics of Turbomachinery
S Taka.haru TANAKA Department of Mechanical Engineering,
متن کاملInfluence of Afterbody and Boundary Layer on Cavitating Flow
The characteristics of a cavitation water tunnel test setup and the experiments of cavitation around different models are given in this paper. Models of test are formed from combination of head and variable length afterbody. The experiments are performed initially with the smooth head and then with the roughened head. Cavitation initiates both in the wake and after the head. If the nose of mode...
متن کاملMicro-Ramp Flow Control of Normal Shock/Boundary Layer Interactions
Boundary layer bleed has conventionally been used to control separation due to shock wave / boundary layer interactions (SBLIs) within supersonic engine inlets. However, bleed systems result in a loss of captured mass flow, incurring higher drag and ultimately lower propulsion system efficiency. Micro-ramp sub-boundary layer vortex generators (SBVGs) arranged in a spanwise array have been propo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Aircraft
سال: 2008
ISSN: 0021-8669,1533-3868
DOI: 10.2514/1.36989