Bond Strength between Reinforcing Bars and Lightweight Aggregate Concrete
نویسندگان
چکیده
منابع مشابه
Prediction of Lightweight Aggregate Concrete Compressive Strength
Nowadays, the better performance of lightweight structures during earthquake has resulted in using lightweight concrete more than ever. However, determining the compressive strength of concrete used in these structures during their service through a none-destructive test is a popular and useful method. One of the main methods of non-destructive testing in the assessment of compressive strength...
متن کاملBond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملBond Strength of Composite CFRP Reinforcing Bars in Timber
The use of near-surface mounted (NSM) fibre-reinforced polymer (FRP) bars is an interesting method for increasing the shear and flexural strength of existing timber members. This article examines the behaviour of carbon FRP (CFRP) bars in timber under direct pull-out conditions. The objective of this experimental program is to investigate the bond strength between composite bars and timber: bar...
متن کاملFlashag – New Lightweight Aggregate for High Strength and Durable Concrete
A new patented lightweight aggregates is tested. This type is given the name Flashag. The only solid raw material used to manufacture these aggregates is fly ash. The aggregates are sintered but not pelletized and the process is easy and inexpensive. This paper describes these patented aggregates and compares them with other lightweight and normal-weight aggregates that are used for concrete. T...
متن کاملCorrosion of Reinforcing Bars in Concrete
The causes and mechanisms of corrosion of reinforcing bars in concrete are described in terms of the practical issues as well as the electrochemistry. The parameters affecting corrosion are (i) the ingress of aggressive species, such as chlorides, which break down the protective film on the reinforcing bar and (ii) the amount of those species necessary to do so. The former is largely controlled...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1969
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.18.151