Bond strength and confinement in reinforced concrete

نویسندگان

چکیده

The strength assessment of existing reinforced concrete structures is challenging when deterioration and detailing deficiencies are present. anchorage the internal steel reinforcement can be critical under particular confinement conditions external pressure, cover transverse reinforcement. interaction between different contributions their effects on bond were investigated with a novel experimental set-up that removed parasitic support pressure. With significant varying cover, maximum strengths obtained for intermediate cover-to-diameter ratios. contribution depended occurrence splitting cracks. These findings lead to improved maintenance strategies.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Steel Confinement on Behavior of Reinforced Concrete Frame

The strength and ductility of concrete improve under multi-axial compressive stress due to confinement effect. Some parameters are effective for considering the confinement in concrete and various stress-strain models were developed by different researchers. Longitudinal and transverse reinforcement steels can influence on confinement in reinforced concrete members. In this paper, various stres...

متن کامل

Bond Deformability of Reinforced Concrete Members

The usual earthquake resistant design philosophy of ductile frame buildings allows the beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated...

متن کامل

Effect of the Concrete Strength on the Concrete-Steel Bond in Concrete Filled Steel Tubes

In this study, the concrete-steel bond strength of concrete filled cylindrical steel tubes has been experimentally investigated. 22 short, high strength and normal concrete filled circular steel tubes were tested. Push-out test was carried out as the common method to evaluate the bond carrying capacity. Four different concrete mixes were used in preparing the specimens. The steel tubes were w...

متن کامل

Bond of Reinforcement in High-Strength Concrete

This paper describes an examination of the development of tension lap splices in high-strength concrete and the applicability of the restriction in the ACI 318 code where the values of √fc′ used to calculate development length shall not exceed 100 psi. The focus is on the development of splices with Grade 60 epoxy-coated and uncoated bars in normalweight concrete. A summary of the behavior of b...

متن کامل

Utilising confinement reinforcement for shear resistance in reinforced concrete structures

Common transverse reinforcement of reinforced concrete members with circular cross-section consists of round ties or spirals. Its purpose in members that are not subjected to significant shear loading is to provide proper confinement for concrete, and eliminate buckling of the longitudinal reinforcement bars. If spirals are to be used as both shear enabler and confiner for reinforced concrete b...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Construction and Building Materials

سال: 2022

ISSN: ['1879-0526', '0950-0618']

DOI: https://doi.org/10.1016/j.conbuildmat.2022.129012