BOND SPLITTING STRENGTH OF LAP SPLICE OF CONCRETE BEAMS USING REINFORCING BAR AND METAL GRID
نویسندگان
چکیده
منابع مشابه
Bond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملA Study on the Bond Strength between High Performance Concrete and Reinforcing Bar
As a preliminary study for the erection of floating structures using high performance concrete, this paper examines the bond characteristics between concrete and the reinforcing bar. Since the floating structure is constructed in aquatic environment, corrosion of the reinforcing steel is likely to develop more prematurely than in onshore structure in case of concrete cracking. A solution to thi...
متن کاملEffect of Reinforcing Bar Contamination on Steel-Concrete Bond During Concrete Construction
Synopsis: During concrete construction, form oil, bond breaker, concrete splatter and other types of contaminants often contaminate reinforcement. Current specifications and quality control measures require the removal and clean up of these contaminants before the placement of concrete due to a concern of a reduction in bonding capacity. This is costly, labor intensive, and may not be necessary...
متن کاملEffect of Preexisting Cracks on Lap Splice Strength of Reinforcing Bars
The effect of preexisting subsurface cracks on the strength of lap splices was investigated. Ten full-scale beams with No. 11 (No. 36) bars and lap splice lengths of 33, 79, and 120 in. (838, 2007, and 3048 mm) were tested. The beams had mitigating features that prevented catastrophic failure upon propagation of the preexisting cracks, such as staggered splices and the presence of some reinforc...
متن کاملCalibration of Bar-Concrete Bond Stress Relationships for Bond Stress Prediction of GFRP Soil Nails Using Experimental Pullout Tests
Even though steel bar is a conventional reinforcement in soil stabilization systems, the problem of corrosion of steel may lead to vast damages especially in aggressive environments. In the past decades, Fiber Reinforced Polymer (FRP) materials have offered an effective solution to overcome the corrosion problem. Despite numerous bond stress-displacement models for reinforcements in concrete, t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIJ Journal of Technology and Design
سال: 2017
ISSN: 1341-9463,1881-8188
DOI: 10.3130/aijt.23.501