Bond Performance of CFRP/Steel Double Strap Joint at Elevated Temperatures

نویسندگان

چکیده

Carbon fiber-reinforced polymer (CFRP) has been used widely in the strengthening of steel structures. Steel/CFRP systems being subjected to elevated temperatures is realistic summer climate events many countries, which leads degradation bond performance between CFRP and steel. Therefore, it critical study behavior CFRP/steel system under temperature. This paper investigates mechanical adhesively bonded double strap joints different temperatures. Thirty were tested failure 10 °C 90 °C. It was found that joint mode changed from adherend debonding as temperature approaching glass transition In addition, ultimate load stiffness decreased significantly near higher than Based on experimental results, a model proposed predict stress

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

THE DEFORMATION BEHAVIOR OF AZ31 MAGNESIUM ALLOY AT ELEVATED TEMPERATURES

AZ31 magnesium alloy is considered as a promising alloy in various applications and industries. Furthermore, to design a proper hot working process (rolling, forging and extrusion), the assessment of hot working behaviour of the alloy is necessary. Accordingly, the hot deformation behaviour of AZ31 alloy was studied through hot compression testing method This was carried out in a wide range of ...

متن کامل

Hydrodynamics of a Gas-Solid Fluidized Bed at Elevated Temperatures Using the Radioactive Particle Tracking Technique

Effect of temperature on hydrodynamics of bubbling gas-solid fluidized beds was investigated.  Experiments were carried out in the range of 25-600 ºC and different superficial gas velocities in the range of 0.17-0.78 m/s with sand particles. Time-position trajectory of particles was obtained by radioactive particle tracking technique. These data were used for determination of mean velocitie...

متن کامل

Microstructural Evolution of Roll Bonded Al-Clad Stainless Steel Sheets at Elevated Temperatures

The cold roll bonding of Al on AISI 304L stainless steel was carried out to fabricate the Al/304L/Al clad sheet composites. The maximum bond strength of 20 N/mm was acquired just by 38% reduction, for which the tearing of the aluminum sheet occurred during the peeling test. The microstructural evolution during subsequent postannealing heat treatment was systematically studied based on the impur...

متن کامل

Numerical Simulation of IGBTs at Elevated Temperatures

In this paper we present a 2D finite difference device simulator which has been developed to underpin the design and optimisation of power IGBTs. The simulator has been used to investigate the effect of elevated temperatures on the performance of the IGBT for use in environments where ambient temperatures up to 200°C are likely. The preliminary results of this investigation are reported here.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Sustainability

سال: 2022

ISSN: ['2071-1050']

DOI: https://doi.org/10.3390/su142315537