Bolted moment connections in drive-in and drive-through steel storage racks
نویسندگان
چکیده
منابع مشابه
Bolted moment connections in drive-in and drive-through steel storage racks
Often unbraced, the stability of steel storage racks may depend solely on the pallet beam to upright connector and on the stiffness of the base plate to floor connection ([1]). This paper presents experimental results from cyclic tests performed on portal beam to upright bolted moment connections intended for cold-formed steel drive-in and drive-through storage racks. In storage racks, portal b...
متن کاملInfluence of pallets on the behaviour and design of steel drive-in racks
This paper analyses the influence of horizontal bracing restraints provided by the friction between pallet bases and rail beams on the static behaviour and design of steel drive-in storage racks. The pallet bracing restraints are shown to significantly influence the structural behaviour of the rack, and their effect on the bending moment distribution of the uprights is studied in the paper. The...
متن کاملStructural behavior of cold-formed stainless steel bolted connections
This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...
متن کاملNumerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames
This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...
متن کاملNon-Linear Behavior of New (FSFN) Moment Resisting Connections in Comparison to the Existing KBB Connections in Steel Frames
After Northridge (1994) and Kobe (1995) earthquakes, several studies have been conducted to improve the seismic performance of steel structures. In this investigation, new steel moment-resisting connections (FSFN) developed by the authors, were studied by the non-linear numerical analysis. These connections were single-sided beam-to-column assemblies that are representative of exterior beam-to-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Constructional Steel Research
سال: 2010
ISSN: 0143-974X
DOI: 10.1016/j.jcsr.2010.01.013