Boiling visualization on vertical fins with tunnel-pore structures
نویسندگان
چکیده
منابع مشابه
Boiling heat transfer on a simulated nuclear fuel rod with annular fins
This work describes an improved design for a nuclear fuel rod, which was developed using an experimental circuit that simulates the nuclear rod environment in a pressurized water reactor (PWR). The heat exchanger circuit runs atmospheric to high-pressure boiling water through an annular finned tube (153 fins), which is used to enhance confined heat transfer rates and guide the nucleate boiling ...
متن کاملProposed Vertical Expansion Tunnel
It is proposed that the adverse effects from secondary diaphragmrupture in an expansion tunnelmaybe reducedor eliminated by orienting the tunnel vertically, matching the test gas pressure and the accelerator gas pressure, and initially separating the test gas from the accelerator gas by density stratification. This proposed configuration is termed the vertical expansion tunnel. Two benefits are...
متن کاملInstability of subcooled boiling film on a vertical wall
Consider a vertical plate with a leading edge. The temperature of the plate is above the spontaneous nucleation temperature, so that vapor completely covers the plate. Two-dimensional quasi-parallel theory is used to examine the stability of the two-phase system. Numerical calculations show that the main parameter determining the thickness of the vapor film and its stability is the difference b...
متن کاملFlow Boiling Heat Transfer on Micro Pin Fins Entrenched in a Microchannel
Flow boiling of 1-methoxyheptafluoropropane (HFE 7000) in 222 m hydraulic diameter channels containing a single row of 24 inline 100 m pin fins was studied for mass fluxes from 350 kg /m2 s to 827 kg /m2 s and wall heat fluxes from 10 W /cm2 to 110 W /cm2. Flow visualization revealed the existence of isolated bubbles, bubbles interacting, multiple flow, and annular flow. The observed flow patte...
متن کاملEnhancement of boiling heat transfer using highly wetting liquids with pressed-on fins at low contact forces
Ahstraet--ln many cooling situations, permanent attachment of fins to heat dissipating devices is undesirable yet htrge mechanical loads, important in reduction of thermal contact resistance, are not permitted. This work considers the interface between a low-force pressed-on fin and a heat source in boiling heat transfer; the thermal contact resistance and how the interface region may be used t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Web of Conferences
سال: 2012
ISSN: 2100-014X
DOI: 10.1051/epjconf/20122502019