Boiling Heat Transfer Characteristics of Subcooled Nitrogen.

Highly subcooled pool boiling heat transfer at various gravity levels

A microscale heater array 2:7 mm 2:7 mm in size along with a video camera was used to provide subcooled pool boiling heat transfer measurements at gravity levels ranging from 1.8g to 10 g. The fluid was FC-72 at 1 atm and subcooled by nominally 36 C for all cases. A Terrier–Orion sounding rocket and the KC-135 aircraft were used to provide the microgravity and low-g environments, respectively. ...

Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition

Fouling is a common, fundamental and costly problem in heat transfer systems, which reduces thermal efficiency of equipment, increases the energy loss and causes strong damage to the heat transfer equipment in various industries. The main causes of fouling on the heat transfer surfaces are salts with inverse temperature-solubility in the fluid which calcium sulfate is one of the most important ...

Fluid flow and heat transfer characteristics of low temperature two-phase micro-channel heat sinks – Part 2. Subcooled boiling pressure drop and heat transfer

This second part of a two-part study explores the performance of a new cooling scheme in which the primary working fluid flowing through a micro-channel heat sink is indirectly cooled by a refrigeration cooling system. The objective of this part of study is to explore the pressure drop and heat transfer characteristics of the heat sink. During single-phase cooling, pressure drop decreased with ...

Critical Heat Flux in Subcooled Flow Boiling of Water

Evaluation of Heat Transfer Shear of Different Mechanisms in Subcooled Nucleate Boiling

Since the mean characteristic of nucleate boiling is bubble formation and collapse near the heating surface, in this study attempts have been made to investigate heat transfer effects due to the bubbles ebullition and collapse cycle. All possible heat transfer mechanisms are studied qualitatively and quantitatively. For quantitative calculation of the heat transfer portion by each of the introd...