Body Freedom Flutter of a Blended Wing Body Model Coupled with Flight Control System
نویسندگان
چکیده
منابع مشابه
A Lateral Directional Flight Control System for the MOB Blended Wing Body Planform
Abstract: In this work, analysis and design of a lateral directional flight control system for a Blended Wing Body (BWB) aircraft is considered. The BWB configuration chosen for this purpose is the European MOB (Multidisciplinary Optimization Blended Wing Body) planform. The MOB configuration does not have vertical control surfaces for directional stability, instead small winglets with rudders ...
متن کاملA blended wing body airplane with a close-coupled, tilting tail
This paper highlights a novel approach to stabilizing and controlling pitch and yaw motion via a set of horizontal tail that can act as elevator and rudder. The tail is incorporated into a new design of blended wing body (BWB) aircraft, known as Baseline-V, located just aft of the trailing edge of its inboard wing. The proposed close-coupled tail is equipped with elevators that deflect in uniso...
متن کاملNonlinear Aeroelasticity of a Very Flexible Blended-Wing-Body Aircraft
This paper presents a study on the coupled aeroelastic/flight dynamic stability and gust response of a blendedwing-body aircraft that derives from the U.S. Air Force’s High Lift-Over-Drag Active (HiLDA) wing experimental model. An effective method is used to model very flexible blended-wing-body vehicles based on a low-order aeroelastic formulation that is capable of capturing the important str...
متن کاملAerodynamic Design Optimization Studies of a Blended-Wing-Body Aircraft
Abstract The blended-wing body is an aircraft configuration that has the potential to be more efficient than conventional large transport aircraft configurations with the same capability. However, the design of the blended-wing is challenging due to the tight coupling between aerodynamic performance, trim, and stability. Other design challenges include the nature and number of the design variab...
متن کاملSystem Noise Assessment of Blended-Wing-Body Aircraft with Open Rotor Propulsion
An aircraft system noise study is presented for the Blended-Wing-Body (BWB) aircraft concept with three open rotor engines mounted on the upper surface of the airframe. It is shown that for such an aircraft, the cumulative Effective Perceived Noise Level (EPNL) is about 24 dB below the current aircraft noise regulations of Stage 4. While this makes the design acoustically viable in meeting the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2015
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2014.12.506